2. Connections – Streaming player WITH amplifier
Bottom side
Ch1
–stereo loudspeaker output (left)
Ch2
– stereo loudspeaker output (right)
SUB
– analog subwoofer output (1 is -, 2 is +)
24V
– power input 24V for the player
BUTTONS –
digital inputs for push-buttons. Configuration is located in Quick Setup
Cont.
–control IO ports
IN
– binary/analog input, to connect e.g. potentiometer for volume control
OT
– binary output, to control e.g. external relay/contactor
GND
– ground for Buttons
A.IN –
Analog input for manual volume control (0-5V, 1-10V, 0-10V)
+5V –
Voltage output for volume control via potentiometer 5 kOhm
Upper side
ETH
– LAN interface to interconnect with local Ethernet network
USB
– 2 x USB interfaces for connection of external flash (music playback) or external WiFi
adapter
IR-control
– 3.5 mm input for external IR emitter
Reset
– Reset button. If pressing >10sec once, the device will be set to default IP 192.168.0.10
with mask 255.255.255.0. If pressing >10sec another time, the device will be completely reset – IP
settings set to DHCP, DLNA and Internet radio library as well as all user settings.