background image

Installation, Service Instructions & Parts

Quality Designed for Proven Performance

Printed in USA

8471 65

AVOID ERROR IN PARTS SELECTION.  When ordering 

use complete EMBERGLO Part Number and Description.  

Furnish Model Number, Bill of Material Number and Serial 

Number (if available) from the specifi cation plate found on  

the product.

IMPORTANT:  Availability of parts as well as specifi cations 

are subject to change without notice.  Please consult factory 

for item availability.

SAFETY INFORMATION TERMS:

 The following terms are used to identify hazards, safety precaution of 

special notations and have standard meanings throughout this manual.  They are printed in all capital letters 
using a bold type face as shown below, and preceded by the exclamation mark symbol.  When you see the 
safety alert symbol and one of the safety information terms as shown below, be aware of the hazard potential.
 

DANGER:

 

Identifi es the most serious hazards which will result in severe personal injury or  

 

 

death.

 

WARNING:

  Signifi es a hazard that could result in personal injury or death.

 

CAUTION: 

Identifi es unsafe practices which would result in minor personal injury or product and      

 

 

property damage.

EmberGlo

A Div of Midco® International Inc.

 

4140 West Victoria Street
Chicago, Illinois 60646
toll free  866.705.0514
tel 

 773.604.8700

fax 

 773.604.4070

web 

 www.emberglo.com

e-mail   sales@emberglo.com

   

 

WARNING:    Improper  installation,  adjustment, 

alteration,  service  or  maintenance  can  cause  property 
damage, injury or death. Read the installation, operating 
and maintenance instructions thoroughly before installing 
or servicing this equipment.

FOR YOUR SAFETY

Do  not  store  or  use  gasoline  or  other  fl ammable  liquids 
and vapors in the  vicinity of this or any other appliance.

PURCHASER:  Retain these instructions for future use.

INSTALLER:

    Inform  and  demonstrate  to  the  user  the  correct 

operation  and  maintenance  of  the  equipment.  Inform  the  user 
of    the  hazards  of  storing  fl ammable  liquids  and  vapors  in  the  
vicinity of this equipment and remove such hazards.

USER:

  Retain  this  manual  for  future  reference.  If  other  than 

routine  service  or  maintenance  as  described  in  this  manual 
and associated literature is required, contact a qualifi ed service 
agency.  DO  NOT ATTEMPT  REPAIRS. An  inadvertent  service 
error could result in a dangerous condition.

Warranty

See the back of this manual for the warranty.

This  warranty  does  not  apply  to  damages  resulting  from         
accident,  misuse,  abuse  or  alteration.  No  equipment  may  be 
returned without written authorization from EmberGlo (or Midco 
International  Inc.)  .  Returned  goods  must  be  shipped  prepaid 
to  the  factory.  Warranty  card  must  be  fi lled  in  and  returned  to 
EmberGlo (or Midco) to validate warranty.

 

CAUTION:

 This manual contains suffi cient information 

for installation of the EmberGlo Broiler in normal locations.

In the United States, installation must conform with local codes.

CODE  COMPLIANCE  IS  THE  SOLE  RESPONSIBILITY  OF 
THE INSTALLER.

 

CAUTION

: Cooking  equipment  should  be  used in an 

environment protected by an automatic fi re suppression    system.  
Consult the National Fire Protection Association NFPA Code 96 
or the latest edition of Standards for Installation of Equipment for 
Removal of Smoke and Grease-Laden Vapors From Commercial 
Cooking Equipment.

 

CAUTION

:  To  avoid  grease  fi lter  fi re  hazard,          

commercial  kitchen  exhaust  hoods  should  be  positioned  at 
a  minimum  of  3½  feet  above  the  broiler  cooking  surface,  as 
specifi ed  by    Commercial  Grease  Removal,  Building  Offi cials 
&  Code  Administrators  International  Inc.  and  the  National 
Mechanical Code, 1990 Seventh Edition (or latest edition), Article 
5, Section M504.0, Table M504.3.2.

 

WARNING:

  Additions, changes, conversions and

service  must  be  performed  by  an  authorized  EmberGlo         
representative or service agency. Use only EmberGlo specifi ed 
and approved parts.

MADE

 in the 

USA

As an ISO 9001:2008 certi

fi

 ed company, we proudly design, manufacture and assemble our products in Chicago, Illinois, USA.

915

Electric Char Broiler

E2436  

Model  Voltage                Model Number
E2436  208 V  Single Phase  5700301
E2436  208 V  Three Phase 

5700303

E2436  240 V  Single Phase  5700300
E2436  240 V  Three Phase 

5700304

E2436  440 V  Three Phase 

5700305

E2436  480 V  Three Phase 

5700306

24

 Wide Electric Char Broilers

Counter Top Models

Model  Voltage                Model Number
E2436F  208 V  Single Phase  5700501
E2436F  208 V  Three Phase 

5700503

E2436F  240 V  Single Phase  5700500
E2436F  240 V  Three Phase 

5700504

E2436F  440 V  Three Phase 

5700505

E2436F  480 V  Three Phase 

5700506

Floor Models

Summary of Contents for E2436F









Reviews: