3
element14 is a trademark of Premier Farnell plc ©2014 Premier Farnell plc. All Rights Reserved.
Lark Board Quick Start Guide
Figure 2
3. The Configuration of the serial port
The debug serial port configurations are shown as below
:
Items
Value
Bund Rate
115200
Data Bits
8
Parity
None
Stop bits
1
Flow control
None
4. Lark Board Boot-up
Complete the above configurations, connect a HDMI/VGA monitor to Lark Board, and
then power on the board, Lark Board will boot the system from eMMC
Note:
Disconnect TF card to Lark bard when booting from eMMC
For more information of Lark board, please refer to:
http://www.embest-tech.com/product/pinggubanxilie/lark-board-evaluation-board.html