EMC
®
VNX
™
Procedure Generator
EMC CONFIDENTIAL
version: 4.5
29 of 51
...Storage System Failure - Contact your Service Representative...
5. [ ] Enter the password
SHIP_it
and press
Enter
. The
Diagnostic Menu
appears.
6. [ ]
Select the
Resume PROM Sub-Menu
, and press
Enter
. The
Resume PROM Sub-Menu
appears.
7. [ ] Select
Set Resume
, and press
Enter
. A list of the devices in the enclosure appears.
8. [ ] Select
XP Chassis
, and press
Enter
.
9. [ ] Press
Enter
for each of the following prompts to accept the default values:
Enter EMC TLA Part Number (16 characters)[100-562-956]:
Enter EMC TLA Artwork Revision (3 characters)[]:
Enter EMC TLA Assembly Revision (3 characters)[A01]:
Enter EMC TLA Serial Number (16 characters)[FCNDN082300025]:
Note:
The prompts will include examples of what should be populated in the system, shown in brackets [].
10. [ ] The system prompts with:
Enter EMC System Hardware TLA PN (16 characters)[100-520-839]:
11. [ ] Enter the
EMC Part Number
field from Table 2 of the Resume PROM information you gathered in
the Saving Resume PROM configuration information procedure, then press
Enter
.
12. [ ] The system prompts with:
Enter EMC System Hardware TLA SN (16 characters)[FNM00084100038]:
13. [ ] Enter the
EMC_SERIAL_NUMBER
from Table 2 of the Resume PROM information you gathered
in the Saving Resume PROM configuration information procedure, then press
Enter
.
14. [ ] The system prompts with:
Enter EMC System Hardware TLA Rev (3 characters)[A01]:
Enter Support Contact Info (128 characters)[]:
15. [ ] Enter the
EMC_ASSEMBLY_REVISION
from Table 2 of the Resume PROM information you
gathered in the Saving Resume PROM configuration information procedure, then press
Enter
.
16. [ ] Enter the value for the Support Contact Info, and then press
Enter
.
17. [ ] The system prompts with:
Enter EMC PN (16 characters)[900-525-002]:
18. [ ] Enter the
PRODUCT PN
(16 characters) = EMC_PRODUCT_PART_NUMBER from Table 2 of the
Resume PROM information you gathered in the Saving Resume PROM configuration information
procedure, then press
Enter
.
19. [ ] The system prompts with:
Enter Product SN (16 characters)[FNM00000000000]:
20. [ ] Enter the
PRODUCT SN
(16 characters) = EMC_PRODUCT_SERIAL_NUMBER from Table 2 of
the Resume PROM information you gathered in the Saving Resume PROM configuration information
procedure, then press
Enter
.
21. [ ] Press
Enter
to accept the default values until the system prompts with:
Enter Assembly Name
(32 characters)[GALILEO A DUAL DATAMOVER -INT]:
