The power LED should be green, indicating the power supply is operational. The
blower and power fault LEDs should be green.
2. At the CLI for the CloudBoost appliance, type
support system-report
, then after
the system report is displayed, type
dae_psu
.
Information about the DAE power supply is displayed.
Enter the data item to view details, or press <ENTER> to return
System Report>
dae_psu
- id: Power Supply B
status: OK
- id: Power Supply A
status: OK
3. To verify that the link controller card is functioning correctly, navigate to
/opt/
maginatics/active/mgt_console/vendor/firmware/SAS/LSI
, and then
run
./lsiutil.x86_64
as root.
root@dpcdd6:/opt/maginatics/P1/mgt_console/vendor/firmware/SAS/LSI#
./lsiutil.x86_64
LIS Logic MPT Configuration Utility, Version 1.63, June 4, 2009
3 MPT Ports found
Port Name Chip Vendor/Type/Rev MPT Rev Firmware Rev IOC
1. ioc0 LSI Logic SAS2008 03 200 090007000 0
2. ioc1 LSI Logic SAS2008 03 200 090007000 0
3. ioc2 LSI Logic SAS2008 03 200 090007000 0
Select a device: [1-3 or 0 to quit]
4. In the output, ensure these MPT ports are found:
ioc0
,
ioc1
, and
ioc2
. If only one
is found, the system does not contain or recognize the replacement expansion
module.
5. Select devices 1 and 2 in turn and review their SAS SLIC information.
If the SLIC (value for Board Name) is Falcon, it is the internal module. If the SLIC (value
for Board Name) Coldfront, it is an expansion module.
a. To select the first device, enter
1
, and at the next prompt enter
69
to display the
SAS SLIC.
b. Enter
0
.
c. To select the second device, enter
2
, and at the next prompt enter
69
.
d. Enter
0
.
Main menu, select an option: [1-99 or e/p/w or 0 to quit]
69
Seg/Bus/Dev/Fun Board Name Board Assembly Board Tracer
0 6 0 0 Coldfront
6. Select devices 1 and 2 in turn and verify that the associated SAS adapters and
expanders are present.
a. To select the first device, enter
1
, and at the next prompt enter
16
to display
information about the SAS adapters and expanders.
b. Enter
0
.
c. To select the second device, enter
2
, and at the next prompt enter
16
.
CloudBoost Disk Array Expansion Replacement
54
EMC CloudBoost 100
2.0
Hardware Component Replacement Guide
Summary of Contents for CloudBoost 100
