PROBLEMS AND SOLUTIONS
Problem
a) The heating element does not work
b) The appliance is very noisy
c) The blender does not work
Solutions
a)
1) Check that the power cord (G) is connected to the socket.
2) Check that the switch is in the right position
3) Check that there is enough water in the tank
4) To reactivate the production of steam after a cycle of use, always first
switch off, then wait for the heating element to cool down sufficiently, then
switch the appliance back on via the switch
5) Check that all the plastic parts are in the right position, especially the cap
(A)
b)
1) Check that all the plastic parts are in the right position
2) Check that the appliance is clean up well
c)
1) Check that the power cord (G) is connected to the socket.
2) Check that the switch is in the right position (switched on the right)
3) Check that all the plastic parts are in the right position, especially the cap
(A)
TECHNICAL FEATURES
MOD. FP050
Nominal voltage: 220-240V~ 50/60Hz
Absorbed power: Boiler 380-420W
Blender 130W
Blender operating cycles: 10sec ON – 10sec OFF
MAX ingredients weight: 300g
Water tank capacity: 250ml
Jar MAX capacity: 1.1L
Weight: 1.7Kg
Measurements: 212x240x280
Manufacturer : Elettroplastica S.p.A - via del Commercio, 1 – 25039
Travagliato (BS) Italy
