Dragon X750 User Manual V 1.0
©2018 Emerging Technology Ventures | www.etvamerica.com
5
i.
For further instructions or questions on the LiPo battery pack,
voltage, LiPo information, or programming the B6AC charger
please see instruction manual included with the charger
The GCS Tablet
The GCS Tablet comes equipped with an internal 3,500 mAh battery, for
approximately 4-hour runtime.
a.
Open the rubber flap covering the Micro USB port
b.
Plug a micro USB cable into the port, and the other side into a
powered USB port
c.
Leave the tablet plugged in until the battery reads full
Assembly
The need may arise where replacing propellers or other parts may be
necessary. The following tools will be required to disassemble and
reassemble the Dragon X750
•
1.0 mm Allen Wrench
•
1.5 mm Allen Wrench
•
2.0 mm Allen Wrench
•
2.5 mm Allen Wrench
•
#2 Phillips Screw Driver
Folding and Unfolding the Arms
The motor arms fold for easy stowing and transport, while also minimizing
the risk of damage.
a.
Loosen the arm knobs holding the hinges together
b.
If the arms are in the folded position pull outward
c.
If the arms are in the unfolded position push inward
Figure 3- Diagram showing how to fold and unfold the arms
