User manual Solar set XS
E18-XSSolarset-EN-00
www.emergoplus.com
Page 11 of 15
▪
For an esthetical nice result, you can apply tape to
locations that you don’t want glued.
▪
Apply the distance tape to one of the surfaces to be
glued. Remove the adhesive back of the tape.
The tape will ensure fixation during the curing of the
sealant. In addition, the tape ensures the required
adhesive thickness, which is 2-3 mm between the
adhesive surfaces.
▪
Cut the nozzle of the sealant tube conform
accompanying image. First cut it horizontally, then cut
out a red triangle.
▪
Apply a triangle adhesive bead onto the surface to be
glued. Keep the sealant tube at 90° relative to the surface.
▪
Position the part and press the glue up to the desired glue
thickness
of
2-3
mm.
▪
Excessive glue can be removed or smoothed by use of an
angled cut-off piece of PVC pipe. Before use, immerse the
pipe into water with detergent. Run the piece of pipe
across the adhesive bead to achieve a smooth result. You
can also lightly moisten the adhesive bead with a plant
