User manual Solar set XS
E18-XSSolarset-EN-00
www.emergoplus.com
Page 12 of 15
sprayer with water and detergent and then use a
squeegee to smoothen the adhesive bead.
▪
The glue will cure by means of moisture absorption from
the ambient air. Depending on the humidity, the curing
will take 1 to 2 days per mm of glue thickness.
▪
The glue can be re-coated with most of the common
automotive paint systems (also water-based). Resin-
based wet paint finish or acidic curing are not suitable.
Re-coating can also be done in wet-on-wet up to 3 hours
after the application. Adhesion op fully hardened glue can
be improved by pre-treatment with Activator.
