Emeril Lagasse Pasta & Beyond
™
19
General Operating Instructions
Slow Juicer Mode
1.
Remove the Storage Tray and insert the Juice
Collector Cup to collect juice. Place the Pulp
Collector Cup in front of the housing.
NOTE:
Juice comes out of the bottom of the Juicer
Housing. Pulp comes out of the front.
2.
Press the Forward Button to extrude clockwise
for 6 minutes.
NOTE:
Pulp may clog the auger or filter after
heavy use or after juicing pulpy fruit/vegetables.
To unjam the appliance, see the “Using the Control
Panel” section.
3.
Press the Start/Pause Button at any time to pause
the juicing process.
REMINDER:
Use the Juice Pulp Filter (perforated
screen) and Round Extrusion Cap.
TIP:
Cut vegetables into smaller chunks or strips to
allow for an easier feed into the slow juicer and to
reduce the risk of blockage. Dense vegetables, like
ginger, should be cut into smaller pieces.
Frozen Treat Mode
1.
Press the Power Button to turn the appliance on.
2.
Press the Forward Button to extrude clockwise for
6 minutes.
3.
Press the Start/Pause Button at any time to pause
the process.
REMINDER:
Use the Frozen Treat Blocker (solid
screen) and Star Extrusion Cap.
TIP:
Remove fruit from the freezer about 10 minutes
before using the fruit with this attachment. Doing so
will allow for the fruit to soften slightly and lower the
risk of blockage.
