emerio WK-122248 Instruction Manual Download

Page: 8 / 63

- 7 -

Auto start function



If you want to set the auto start time to brew water, firstly follow the steps “1) - 3)” in section “

Brew

water

”. If you want to set the auto start time to brew tea, firstly follow the steps “1) - 4)” in section

“

Brew tea

”.



And then follow the below steps:
-

Press  and  hold  the  button  “AUTO  START”  for  approx.  2  seconds.  The  indicator  light  of  the  button
“AUTO  START” will  illuminate  in  blue  and  the  digital  display  will  flash the  “CURRENT TIME”  and the
“START TIME”.

Press the temperature setting buttons to set the current time, the digital display will show the value
under “CURRENT TIME”. Press the time setting buttons to set the start time, the digital display will
show the value under “START TIME”. (See below picture.) The time cycle is 24 hours. Long press for
rapid adjustment.

Then press the button “ON/OFF” to enter into the auto-start working mode. The digital display will
extinguish after 20 seconds.

When the current time counts to reach the start time, the appliance will start brewing.

Keep warm function



Press the keep warm button during brewing, its indicator light will illuminate in blue. After brewing is
finished,  3  beep  sounds  will  be  heard  and  then  the  appliance  will  enter  into  keep-warm  mode.  The
digital display will start to count the time and  extinguish after approx. 20 seconds. You can press any
button  to turn on the  digital display to check  the  current  temperature and the  keep warm time.  The
whole keep-warm process will last 30 minutes. The keep-warm temperature is ≥60

℃.

Press the button

“ON/OFF” or “Keep warm” to exit the keep warm function.

Under keep-warm mode the tea-brewing

basket should not move. It should stay on top.



Press the keep warm button after the brewing is finished, the digital display will show “

” and then

show the current water temperature.
-

If the current water temperature is ≥60

℃

, the appliance will enter into keep-warm mode. The digital

display will start to count the time and extinguish after approx. 20 seconds. The keep warm function
will operate as above.

If the current water temperature is

＜

℃

, the appliance will not enter into keep-warm mode. The

digital display will flash the temperature value 3 times and extinguish after approx. 20 seconds.

Tips:



The digital display will extinguish in approx. 20 seconds with no operations. If you want to do further
operations, press any button first to turn on the digital display and then press the buttons to choose
your desired functions.



The appliance will not work if the set temperature is lower than the current water temperature.

Boil-dry protection

Should you accidentally let the kettle operate without water, the boil-dry protection will automatically
switch off the power. If this occurs, allow the kettle to cool before filling with cold water and re-boiling.