3
To change the ‘On’, Day Mode, and ‘Off’ settings for Program 1:
1.) When the ‘On’ time is showing on the display depress the
PROGRAM
button for 2 seconds until the
‘On’ time and Day indicators begin flashing and the
AUTO
indicator appears.
This is your indication that Program 1 is ‘On’.
2.) Press the
UP or
DOWN
button adjust the turn ‘On’ time as desired.
3.) If you wish to adjust the Day Mode, press the
MODE
button repeatedly to scroll through the Day Mode options as follows:
• All Indicators Flashing – The timer will operate every day.
• Monday thru Saturday operation.
• Monday thru Friday operation.
• Saturday / Sunday operation.
• Sunday only.
• Monday only.
• Tuesday only.
• Wednesday only.
• Thursday only.
• Friday only
• Saturday only
When the desired Day Mode is flashing, press the
PROGRAM
button again. The ‘Off’ time begins
flashing in the display.
4.) Press the
UP or
DOWN
buttons to adjust the turn ‘Off’ time as desired.
5.) When the desired ‘Off’ time is flashing press the
PROGRAM
button once more. The display returns to the ‘On’ time.
After 5 seconds the display exits the Program setting mode and return to the correct time. The
AUTO
indicator disappears.
To change the settings for Programs 2, 3, or 4, press the
PROGRAM
button until the desired Program number appears and the display is
showing the turn ‘On’ time for that program. Then follow steps 1 – 5 above to change the settings for that program.
To Enable or Disable The Programs
When you enter the ‘On’ time setting mode for any one of the programs, that program is automatically turned ‘On’ (Enabled). The
AUTO
indicator appears in the display together with the specific program number and any lamp connected to the “Timed” outlet of this timer will
be switched ‘on’ and ‘off’ according to the programmed settings.
To cancel (Disable) one or more of the programs, press the
PROGRAM
button repeatedly to scroll through the 4 ‘On’ time displays. If the
AUTO
indicator appears together with any of the Program indicators, that program is ‘On’ (Enabled).
To cancel (Disable) that program so that it does not operate, press the
ON/OFF
button. The
AUTO
indicator disappears and that specific
program is cancelled.
Pressing the
ON/OFF
button, while any of the 4 program indicators appears on the display, switches that specific program ‘On’ or ‘Off’.
To Disable all of the Programs, press the
MODE
button when the display is showing the correct time. All of the Program indicators will
disappear from the display and all the timer programs are disabled.
To Enable all of the Programs, press the
MODE
button again. The Program indicators will reappear in the display and all of the Programs
are enabled again.
Random Mode
The Random Mode provides an extra measure of security by randomly varying the programmed ‘On’ and ‘Off’ times so that the lamp
connected to this timer is not turning on and off at exactly the same time each day. The variation in the ‘On’ and ‘Off’ time ranges
from 0 minutes to 75 minutes.
To activate the Random Mode, press the
PROGRAM
button to display the
P1
turn ‘On’ time, then press
the
RANDOM
button. The
RANDOM
indicator appears. The display returns to correct time in 5 seconds.
NOTE:
When the Random Mode is selected it will apply to all of the timer programs that are ‘On’ (Enabled).
To cancel the Random Mode, press the
PROGRAM
button to display the
P1
turn ‘On’ time, then press the
RANDOM
button again. The
RANDOM
indicator disappears.
Final Connections
After adjusting one or more of the 4 programs with your desired ‘On’, ‘Off’, and Day Mode settings, connect the timer to your AC outlet.
Connect the lamp that you wish to control to the
TIMED OUTLET
of this timer.
IMPORTANT! REMEMBER TO SET YOUR LAMP SWITCH TO THE ‘ON’ POSITION. THIS TIMER CAN TURN YOUR LAMP ‘ON’
AND ‘OFF’ WHEN THE LAMP SWITCH IS IN THE “ON” POSITION, BUT IT CANNOT TURN ‘ON’ YOUR LAMP IF THE LAMP
SWITCH IS IN THE “OFF” POSITION.
