background image

4

NOTE:

 To switch the lamp that is connected to the 

TIMED OUTLET

 ‘On’ or ‘Off’ at any time, press the 

ON/OFF

 button.

Use the “

EXTRA UNTIMED OUTLET

” to power a second device intended for continuous, uninterrupted operation.

Replacing The Battery

When the Low battery indicator 

 begins flashing you should purchase a replacement 

CR2032

 lithium battery as soon as possible.

Remove the timer from your AC outlet and remove the battery holder from the timer as shown.

Remove the original battery and install the new battery as illustrated.

The timer can maintain all of the programmed settings for about 5 minutes even after the original battery
is removed, so be sure you have purchased a fresh battery and have it ready to install before you
disconnect the timer from your AC outlet.

If the timer is disconnected from the AC outlet and the battery is removed for more than 5 minutes, the
timer memory may be erased  and all settings must be reprogrammed after a fresh battery is installed.

Timer Protection Circuit / Resetting The Timer

This timer is equipped with a special protection circuit designed to prevent permanent damage
from sudden ‘spikes’ in you household AC power supply.

If such a power ‘spike’ occurs the timer may ‘freeze’ and all of the controls will be inoperable.

If this occurs, use the tip of a straightened paper clip of similar object to press the 

RESET

button on the back panel of the timer cabinet.

NOTE:

 Pressing the 

RESET

 button erases the timer memory. All indicators in the display

will turn ‘On’ for one second, and then the timer will return to its original factory default
settings. It will be necessary for you to reset the Time Zone, Year, Month/Date, Time,
and all timer program settings.

CR2032 

JMK2442-041107-02

Printed in China

Emerson Radio Corp. warrants manufacturing defects in original material, including

original parts and workmanship, under normal use and conditions, for a period of

ninety (90) days from the date of original purchase in the U.S. With your dated

proof of purchase, we will provide repair service at no charge for labor and parts at

an authorized Depot Repair Facility, or replace the product in our discretion. For

repair or replacement, pack your unit in a padded box, enclose your check or money

order payable to Emerson Radio Corp. in the amount of $5.00 (not required by

California residents) to cover shipping and handling costs, and enclose a copy of

your proof of purchase. Send your unit to:

Emerson Radio Corp.,

5101 Statesman Drive,

Irving, TX 75063.

1-800-898-9020.

This warranty does not cover damage from negligence, misuse, abuse, accident,

failure to follow operating instructions, commercial use, rental, repairs by an

unauthorized facility, or products purchased, used, serviced or damaged outside of

the United States.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY

ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

AU898H

LIMITED WARRANTY

Risk Of Electric Shock

  • Do not open or tamper with unit.

  • Plug directly into an electric outlet.

  • For indoor use only.

  • Remove timer from outlet before cleaning.

  • Keep children away from timer and outlet.

SAFETY WARNING

Risk Of Fire

  • For only 120V AC 60Hz voltage usage.

  • Do not use to control irons and cooking appliances, etc.

  • Do not exceed the recommended electrical ratings.

Ratings:

Rated Impluse Voltage = 1500V.

Maximum Power Output: 1800W.

Type of Disconnection: Type 1B.

For household use only.

    Warnings:

Do not use the timer to turn off power for maintenance work (repairs, removing broken bulbs, etc).

Always turn power off at the service panel by removing a fuse or tripping the circuit breaker before doing any electric repairs.

Never Submerge Unit Into Water

Summary of Contents for SmartSet JMK2442

Page 1: ...tion The long life 3V lithium battery Type CR2032 is pre installed in the timer There is no need to install any battery at this time The original battery should provide back up power for between 3 and 5 years at a minimum When it is time to replace the battery a Low Battery indicator will begin flashing in the display Refer to the Replacing The Battery section in these instructions Display and Bac...

Page 2: ...e and return to the correct time display 6 If necessary to adjust the Year depress the MONTH DATE and TIME buttons together until the current Year display begins flashing Press the UP or DOWN buttons to set the display to the correct ct year then press the MONTH DATE button once more to enter the new year and return to the correct time display To check the date at any time press the MONTH DATE but...

Page 3: ...button repeatedly to scroll through the 4 On time displays If the AUTO indicator appears together with any of the Program indicators that program is On Enabled To cancel Disable that program so that it does not operate press the ON OFF button The AUTO indicator disappears and that specific program is cancelled Pressing the ON OFF button while any of the 4 program indicators appears on the display ...

Page 4: ...107 02 Printed in China Emerson Radio Corp warrants manufacturing defects in original material including original parts and workmanship under normal use and conditions for a period of ninety 90 days from the date of original purchase in the U S With your dated proof of purchase we will provide repair service at no charge for labor and parts at an authorized Depot Repair Facility or replace the pro...

Reviews: