Types 1301F and 1301G
7
Parts Ordering
When corresponding with your local Sales Office about
this regulator, include the type number and all other
pertinent information stamped on the bottom cap and
on the nameplate. Specify the complete 11-character
part number from the following parts list when ordering
replacement parts.
Parts List
Note
Parts marked NACE in this parts list
are intended for corrosion-resistant
service as detailed in the NACE
International Standards MR0175/
ISO 15156 and/or MR0103.
Key Description
Part Number
Parts Kits (Includes keys 5, 6, 7, 12, 13 and 14)
Stainless steel kits include Fluorocarbon (FKM)
gaskets. Brass kits include Neoprene (CR) gaskets.
Brass
With Nylon (PA) Disk
R1301FX0012
Stainless steel
With Nylon (PA) Disk
R1301FX0022
Brass
With PTFE Disk
R1301FX0032
Stainless steel
With PTFE Disk
R1301FX0042
1 Body
1/4 NPT Connection
Brass (2 outlet port)
39A1342X012
Brass (3 outlet port)
ERAA00584A0
CF8M Stainless steel (2 outlet port)
32B4291X022
CF8M Stainless steel (3 outlet port)
ERAA00603A0
1/4 x 1/2 in. Flanged Connection
CF8M Stainless steel
CL300 RF
14B1420X012
CL600 RF
14B2059X012
CL1500 RF
14B3375X012
PN 25
14B3377X012
1/4 x 1 in. Flanged Connection
CF8M Stainless steel
CL300 RF
14B3376X012
CL600 RF
14B1386X012
CL1500 RF
14B3370X012
PN 25
14B3377X022
Body (Cold Temperature)
1/4 NPT Connection
CF8M Stainless steel (2 outlet port)
34B0527X012
CF8M Stainless steel (3 outlet port)
ERAA00604A0
NPS 1/4, NPT Connection
2
Spring Case
Type 1301F
Brass
Standard
or with T-Handle
1D383113012
Stainless steel
With 1/4 NPT vent connection
22B0753X012
Key Description
Part Number
2
Spring Case (continued)
Type 1301G
1/8 NPT vent connection
Standard
or with T-Handle
Brass
2P195713022
316 Stainless steel
21A6377X012
3
Bottom Cap
Brass
1D468513012
304 Stainless steel
1J919635072
316 Stainless steel (NACE)
1J9196X0032
4
Yoke
Brass
1D383313012
316 Stainless steel (NACE)
1J925936042
5*
Orifice
303 Stainless steel
1D386535032
316 Stainless steel (NACE)
1D3865X0032
6*
Valve Disk Assembly
Brass/Nylon (PA)
1D4684000A2
Brass/PTFE
1D4684X0012
303 Stainless steel/Nylon (PA)
1D4684000C2
303 Stainless steel/PTFE
1D4684000B2
316 Stainless steel/PTFE (NACE)
1D4684X0082
7*
Diaphragm (2 required)
302 Stainless steel
1D387036012
Monel
®
(NACE)
1D3870X0012
8
Diaphragm Plate, Zinc-plated steel
Type 1301F
1D387325072
Type 1301G
1K155725072
9
Upper Spring Seat, Steel
Type 1301F
1B798525062
Type 1301G
1K155828982
10
Valve Spring
302 Stainless steel
1D387137022
Inconel
®
X750 (NACE)
15A3522X012
11
Spring, Zinc-plated steel
Type 1301F
0 to 75 psig / 0 to 5.2 bar, Blue
1D387227022
0 to 150 psig / 0 to 10.3 bar, Silver
1B788527022
0 to 225 psig / 0 to 15.5 bar, Red
1D465127142
Type 1301G
200 to 500 psig / 13.8 to 34.5 bar, Silver
1K156027142
12* Body Gasket
Neoprene (CR)
1D372903012
Fluorocarbon (FKM)
1D372904122
13* Diaphragm Plate Gasket
Neoprene (CR)
1D373003012
Fluorocarbon (FKM)
1D373004122
14* Bottom Cap O-ring
Fluorocarbon (FKM)
1J926806382
EPDM
1J9268X0022
Nitrile (NBR) -65F
1J9268X0012
Fluorosilicone (FVQM) -80F
ERAA03306A0
15
Adjusting Screw
Type 1301F
Steel
(standard)
1E639928992
Handwheel, 416 Stainless steel
1N411435132
T-handle, Steel
1F2236000A2
Type 1301G
Zinc-plated steel
(standard)
1K140624092
T-handle, Steel
19A8060X012
16
Spring Case Cap Screw (6 required)
Zinc-plated steel
1E8220X0012
Stainless steel
1E8220X0212
Stainless steel
(For Type 1301G Cold Temperature)
1E8220X0022
*Recommended spare part.
Monel
®
and Inconel
®
are trademarks of Special Metals Corporation.
