20
E.T.L. Model No.: CF985
11. Wall Control Installation
(Continued)
11.3
Before installing the SW605 wall control, place the SW605
wall control in “OFF” mode by pushing “ON/OFF” switch to
the “OFF” position.
11.4
Connect one black wire of the SW605 wall control to the
“hot” wire. Securely connect wires with wire connectors
supplied (Figure 34).
11.5
Connect one black wire of wall switch to the “load” (black)
wire in wall box. Securely connect wires with wire
connector supplied.
11.6
Screw the SW605 wall control into wall box using the
supplied screws. Leave the SW605 wall control in “OFF”
mode until fan installation is completed.
11.7
The SW605 wall control is supplied with a white, ivory, and
almond color switch covers. Choose the finish that best
suits your needs and snap the cover onto the SW605 wall
control (Figure 34).
11.8
Install decorator wall plate using the two screws provided
with wall plate. Leave the SW605 wall control in “OFF”
mode
until
fan
installation
is
completed
(Figure 34).
SW605 FAN/LIGHT
WALL CONTROL
WALL BOX
BL
AC
K
BL
K
HOT
SWITCH COVER
DECORATIVE WALL PLATE
SCREWS (2)
NEUTRAL
WIRES
TO
120
VAC SOURCE
TO
LOAD
G
R
O
U
ND
Figure 34
Check to see that all connections are tight and that no
bare wires are visible at the wire connectors.
WARNING
!
Do not connect any neutral (white) wire to this control.
Incorrect wiring will damage this control.
WARNING
!
