1
Introduction
Auxiliary Power Supply
Note
ALP’s are intended for use with E Series drives only.
ALP-130
The ALP-130 supplies enough logic power for one E Series
drive with any function module (FM). It comes with the
hardware necessary for mounting to most DIN rail mounting
tracks and includes the screw terminal plug connectors to mate
with the auxiliary supply receptacle on the drive and the drive
end connector kit and includes a ALPC-xxx cable to mate with
the recepticle on the drive.
Note
The ALP-130 is considered a Class 2 device. As such, there
is not a connection for PE on the ALP-130. Protect Class 2
referes to any equipment in which protection against
electrical shock does not rely on basic insulation only, but in
which additonal safety precautions such as double
insulation or reinforced insulation are provided, there being
no provision for protective earthing or reliance upon
installation provisions according to EN 50178.
ALP-430
The ALP-430 has four isolated power supply outputs to provide
enough logic power for up to four E Series drives with function
modules. It comes with the hardware necessary for mounting
A
L
P
-1
3
0
a
n
d
A
L
P
-4
3
0
Summary of Contents for ALP-130
Page 12: ......
Page 14: ......
Page 17: ...3 Installation ALP 130 Wiring Example 230 VAC Backup Power ALPC xxx Cable ALP 130 and ALP 430 ...