6
ETL Model No.: CF880
MOTOR HOUSING
SCREW (3)
LIGHT KIT
ADAPTER
KEY HOLE
SLOT (2)
Figure 6
LIGHT KIT
ASSEMBLY
LIGHT KIT
ASSEMBLY
WHITE WIRE
MOTOR
CONNECTOR
WHITE WIRE
MOTOR
CONNECTOR
BLACK WIRE
LIGHT KIT
ASSEMBLY
BLACK WIRE
Figure 7
LIGHT KIT
ASSEMBLY
LIGHT KIT ADAPTER
SCREW (3)
Figure 8
13.
Remove one of the screws from the motor housing.
Retain for future installation. Loosen the two
remaining screws in the motor housing for
installation of the light kit adapter.
14.
Position the light kit adapter onto the motor housing.
Rotate the adapter clockwise to engage the keyhole
slots onto the two loosened screws of the motor
housing. Reinstall the screw previously removed
and tighten the three screws to complete the light kit
adapter installation (Figure 6).
15.
Engage the white wire connector of the light kit
assembly with the white wire connector of the motor
connector (Figure 7). Engage the black wire
connector of the light kit assembly with the black
wire connector of the motor connector. Make sure
the connector latches are closed properly.
16.
Remove one of the screws from the light kit
adapter. Retain for future installation. Loosen the
two remaining screws in the light kit adapter for
installation of the light kit assembly.
17.
Carefully tuck all wires and connectors under the
light kit assembly while installing the light kit
assembly to the light kit adapter.
NOTE: Do not pinch wires between the light kit
assembly and the light kit adapter.
18.
Place the light kit assembly onto the light kit
adapter. Rotate the light kit assembly clockwise on
the light kit adapter to engage the keyholes onto the
loosened screws. Retighten the two screws and
reinstall the screw previously removed. Tighten all
three screws securely (Figure 8).
19.
You have now partially completed the assembly of
your new ceiling fan. You can now proceed with
hanging and wiring your fan.
Ceiling Fan Assembly
(continued)
Summary of Contents for AMHURST CF880BS00
Page 18: ...18 ETL Model No CF880 Notes ...
