Power Communication Products
Fig. 17:
Communication
Interface Module
5500 Series Thin Web Server
(for use with
products)
The ASCO Thin Web Server allows you to monitor and control transfer switches
and engine generators anytime over the Internet or an Intranet from anywhere in
the world. It also transmits a page message that an alarm has occurred with one
or more of the transfer switches. Plus, this is possible from your home computer
or anywhere that has Internet service, using the ASCO Thin Web Server single-
board computer with its embedded
Site
Web HTML web pages.
5100 Series Telephone Interface Module
(for use with
Power
Quest
®
VP
i
)
The ASCO Telephone Interface Module (TIM) allows users to dial directly into their
ASCO communications network for monitoring and/or control. The TIM connects to
the ASCO communication network via RS-485 and the phone port connects
directly into an analog phone jack. Also, the TIM has an RS-232 connector which
allows the TIM to be used as the dialing modem.
Supplied with 120 VAC to 18 VDC (nominal) UL approved, class 2 power supply.
Communications Products for Series 300 Transfer Switches
Description
Acc. Option
Catalog No.
Communication Interface Module
72A
—
Telephone Interface Module for Remote Monitoring*
—
5120
Power Manager with Display*
—
5200D
Thin Web Server*
—
5510E
Thin Web Server with Modem*
—
5510M
Power
Quest
VP
i
Software Package*
—
VP
i
32.15
Fig. 19:
Thin Web Server
Fig. 18:
Telephone
Interface Module
Power
Quest
®
VP
i
vs.
Communication Interface Module (Acc 72A)
Communication Interface Module to allow local, remote or web-enabled
communications with ASCO
Power
Quest
®
VP
i
or
Site
Web
TM
communication products.
An accessory 72A is required on each power transfer switch.
Feature
PPoow
weerr
Q
Quueesstt
V
VPP
ii
3322..1155
Number of Monitored/Controlled Power Transfer Switches
32
64
Number of Monitored/Controlled Gensets
4
8
Web Access
No
Yes
Monitor Multiple Sites
Yes
Yes
Multiple Client Access
No
Yes
Client Software Required
Yes
No
Email / Paging upon Alarms
No
Yes
Fig. 20:
ASCO 5200D Series Power Manager
5200 Series Power Manager
(available as a stand alone product only)
The ASCO 5200 Series Power Manager is a microprocessor
metering device specifically designed for transfer switch
applications to provide real-time measurements of single and
three-phase power systems. It uses digital signal processing
technology to measure voltage and phase currents, which it
uses to calculate real, reactive, and apparent power and
bi-directional energy. All measurements can be displayed
locally or at a remote PC via
Power
Quest
®
or
Site
Web™. It
can also collect data for both normal and emergency
positions using auxiliary contact inputs from the transfer
switch. Eight digital input and four digital outputs available
for customer use.
*Note:
These products are available as separate items only. They can be ordered by catalog numbers shown in above chart.
