24
Program Play (Audio CDs only)
Y
ou can play the contents of the disc in the order you
want by arranging the order of the tracks on the disc to
create your own program. One program can be stored in
the system and contain up to 20 tracks.
Notes:
This function is not available for DVD and MP3 disc.
We recommend that you turn your TV ‘On’ while
programming a CD since the Program Numbers only
appear on the On Screen TV Display. They do not
appear on the front panel display. Once you begin
programmed playback you can shut the TV ‘Off’.
You cannot program a DVD disc or a CD containing
MP3 compressed audio files.
1. In stop mode, press the PROGRAM button to enter
program registration mode. The programming display
appears on the TV screen and the front panel display.
2. Use the number button (0-9) on the remote control to
key in the track numbers you wish to program. If the
track number is 10 or higher press the corresponding
two buttons on the remote. For example to program
track number 15, press “1”, “5”. Each time you press
the Number buttons the program number display
automatically advances to the next number.
The maximum number of tracks that can be programmed
is 20. If you exceed that number the “Full” indicator will
appear on the TV screen and the front panel display.
3. After you have completed the above program
registration, press the PLAY (
) button to start
programmed playback.
Note:
If you press the STOP (
) button or other foreign
buttons in the program setting mode, the system will
interrupt and exit the program setting mode.
4. In program play mode, press the STOP (
) button to
stop program play, but the program sequence remains
in memory.
Notes:
The program remains even after the program play ends.
When you press the PLAY (
), you can play the same
program again.
You can do repeat play of the programmed tracks by
pressing the REPEAT button while in the program play
mode.
5. To cancel the program from the memory after the disc
has stopped press the PROGRAM button twice. The
Program indicator on the front panel display will
disappear.
Notes:
The program sequence is also canceled when:
-
you open the disc tray.
- you turn the power off.