27
Settings and Adjustments
This chapter explains how to use the SETUP MENU to
adjust various functions and controls. We have preset all
of the functions and controls of this system at our factory
to the preferred settings for the system to be used in
North America. In most cases the original default settings
should not be changed. However you may want to change
certain default settings such as the language for the audio,
the on screen displays, the subtitles, the parental control
level, etc. Follow the instructions in this chapter to change
those settings. Keep in mind that when you change a
default setting your new setting becomes the new default
and remains in the system memory until you either change
that individual setting again, or reset all the defaults to the
original factory settings.
Using the SETUP Menu and
Navigation Buttons (
<
/
>
/
Ù
/
Ú
)
The SETUP Menu contains a listing of all of the
optional settings that are included in this Audio/Video
system. They have all been preset to the correct
positions for using the system in North America.
Press the SETUP button on the remote control to
access the GENERAL SETUP Page.
Press the (
Ù
/
Ú
) buttons to “highlight” one of the four
pages which appear on the Main Page. And then press
the ENTER button to select the “highlighted” page. The
selected page will appear on the TV screen.
Notes:
The Preferences Page cannot be selected while a disc
is playing. If a disc is playing press the SETUP button
again to exit the SETUP Menu page and press
STOP button twice to stop playback. Then press the
SETUP button again to reenter the General Setup
Page. The Preferences Page can now be selected.
When the selected page is opened, use the (
Ù
/
Ú
) buttons
to “highlight” one of the settings on the page. The options
for the “highlighted” setting will appear in the right column.
One of those options will already be “highlighted”. This is
the factory default setting. Use the (
>
) button to move into
the right column, and then use the (
Ù
/
Ú
) buttons to scroll
up or down to select a new setting. When the desired
setting is “highlighted”, press the ENTER button to select
the “highlighted” setting. This will become the new default
setting.
If you want to change any other settings use the (
<
) button
to move back to the left column and then use the (
Ù
/
Ú
)
arrows to select the next item to be changed. If you are
finished making changes press the SETUP button again
to exit the SETUP Menu. The menu page disappears from
the TV screen.
