DEUTSCH
ENGLISH
Rack PDUs Mounting Options
Index b
Seite / Page 55
(ECR no. 15302)
7
Avocent PM 3000
Avocent PM 3000
7.1
Montage mittles der mitgelieferten
Befestigungswinkel
Installation using the supplied mounting
brackets
Notwendiges Werkzeug
– Phillips-Schraubendreher Nr. 1, 2
Tools required
– Phillips screw driver no. 1, 2
Befestigungssatzinhalt
– Montagew inkel (2 Stk.)
– Schrauben (4 Stk.)
Content of the mounting kit
– Mounting brackets (2 pcs)
– Screw s (4 pcs)
Anderes notwendige Montagezubehör
– Federmuttern M5
– Linsenschrauben FormZ M5x10
Dieses Montagematerial gehört nicht zum Lieferumfang der PDU
und muss separat aus dem Katalog bestellt w erden – Bestell-Nr.
05.041.335.9
(Inhalt:
50
Federmuttern
M5
breit,
50
Linsenschrauben M5x10).
Other necessary mounting hardware
– Spring nuts M5
– Lens head screw s formZ M5x10
This mounting hardw are is not included in the package w ith PDU
and must be ordered separately from the catalogue – order no.
05.041.335.9 (content: 50 spring nuts M5 w ide, 50 lens head
screw s M5x10).
Montieren
Installation
1. Mitgelieferte Montagew inkel mittels Schrauben befestigen
1. Attach the supplied mounting brackets using screw s
2. Federmuttern M5 in die T-Nuten der Profile einstecken und
PDU-Einheit mittels vier Linsenschrauben befestigen
2. Insert the spring nuts M5 in the T-slots in the extrusions and
attach the PDU unit using four lens head screw s
4x
2,8 Nm
A
B