15.
Engage the connector of the switch housing
assembly with the motor connector (Figure 8). The
two connectors are keyed and color-coded and
must be mated correctly (color-to-color) before they
can be engaged. Make sure the connector latch
closes properly.
16.
Remove the three switch housing screws from the
switch housing cover plate. Position the switch
housing assembly on the switch housing cover
plate and align the holes in the switch housing
assembly with the holes in the plate. Secure the
switch housing assembly by installing the three
screws (Figure 9).
NOTE: Do not pinch wires between the switch
housing assembly and the switch housing plate.
17.
Connect the wood pendant onto the 3-speed fan
switch pull chain using coupling provided.
18.
You have now completed the assembly of your new
ceiling fan. You can now proceed with hanging and
wiring your fan.
SWITCH HOUSING
ASSEMBLY
CONNECTOR
MOTOR HOUSING
CONNECTOR
SWITCH
HOUSING
ASSEMBLY
Figure 8
SWITCH
HOUSING
ASSEMBLY
SWITCH HOUSING
ASSEMBLY SCREWS (3)
Figure 9
Electrical Requirements
6
U.L. Model No.: CF810
Your new ceiling fan will require a grounded electrical
supply line of 120 volts AC, 60 Hz, 15 amp circuit.
To reduce the risk of fire, electric shock, or personal
injury, mount fan to outlet box marked “Acceptable for
Fan Support of 15.9kg. (35 lbs.) or less”, and use
screws supplied with outlet box. Most outlet boxes
commonly used for support of light fixtures are not
acceptable for fan support and may need to be
replaced. Consult a qualified electrician if in doubt.
WARNING
!
To avoid fire or shock, follow all wiring instructions
carefully.
Any electrical work not described in these
instructions should be done or approved by a licensed
electrician.
WARNING
!
The outlet box must be securely anchored and capable
of withstanding a load of at least 50 pounds.
If your fan is to replace an existing ceiling light fixture,
turn electricity off at the main fuse box at this time and
remove the existing light fixture.
Please call Emerson technical support at
1-800-654-3545 if you have any questions
about installation and operation of this ceiling fan.
Ceiling Fan Assembly
(continued)
