Programming Instructions
TEC2-RS485-1001 Rev. 1
September 2015
7
Section 1: TEC2 CCM Programming Instructions
TEC2 CCM Programming Instructions
Figure 11
Open BIN File
12.
Figure 12 below shows that in Step 2 box, the CRC values of the code in the
existing board “Stored” is the CRC in the code. Calc is the CRC that TEC-Flash
calculated for the code on the board. In the Step 3 box, the Stored is the CRC for
the new file that is stored in the new BIN file itself. Calc is the value of the CRC that
the TEC-Flash.exe program calculated for the BIN file you selected to download.
The Btldr = Bootloader and App = the Target executable file. See Figure 12.
Figure 12
Screen Showing that Target executable and New File to
Download are different.
