Programming Instructions
TEC2-RS485-1001 Rev. 1
September 2015
9
Section 1: TEC2 CCM Programming Instructions
TEC2 CCM Programming Instructions
Figure 14
Upgrade in Progress
14.
You should now see the Step 5 “In Progress” and the green download status bar.
See Figure 15.
Figure 15
Download in Progress. Takes 5 to 6 minutes to finish with
wired connection.
15.
When the Download has completed, you can now perform Steps 7, 8 and 9.
Step 9 restarts the actuator code and should now be running the new code you
just downloaded. See Figures 16 and 17.
Figure 16
Start Application
