18
ETL Model No.: CF835
12. Installing the Light Fitter and Shade
(Continued)
SWITCH HOUSING
SWITCH HOUSING
BLUE WIRE
LIGHT FITTER
BLACK WIRE
LIGHT FITTER
WIRE
CONNECTOR
Figure 27
12.3
Connect the Ceiling Fan Blue Wire to the Light Fitter
Black Wire. Use one of the Wire Connector (previously
removed) to make the connection (Figure 27).
LIGHT FITTER
#8-32 x 8 mm FLAT
HEAD SCREWS (3)
SWITCH
HOUSING
SWITCH
HOUSING
LIGHT FITTER
PULL CHAIN
CURVED SLOT
REVERSE SWITCH
LONG SLOT
Figure 28
12.4
Remove and Retain the Three #8-32 x 8 mm Flat Head
Screws from the Switch Housing (Figure 28).
Carefully tuck all Wires and Splices into the Switch
Housing.
NOTE: The Light Fitter has a Long Slot that Has
To Line Up with the Reverse Switch and a Curved
Slot that Has To Line Up with the Pull Chain,
both located inside the Switch Housing.
Align the Three Light Fitter Screw Holes with the Three
Switch Housing Screw Holes.
Reinstall and Tighten the Three Switch Housing
Screws, previously removed, to secure the Light Fitter
to the Switch Housing (Figure 28).
A spare #8-32 x 8 mm Flat Head Screw is in the
hardware bag, if needed.
To avoid fire or electrical shock, be careful not to
pinch wires between the switch housing assembly and
the cover.
WARNING
!
