background image

1 9

Wake To CD

IMPORTANT

: This model includes an automatic default to the Buzzer alarm if

the player cannot read the disc that you selected for wake-up. If the player

cannot read the disc's Table of Contents (TOC) within 8 seconds, it assumes

that the disc is either defective or inserted incorrectly, and the system

automatically defaults to the Buzzer alarm to make sure that you wake up on

time. The TOC of CD-RW discs may take longer to read than normal CD's.

Therefore if you are trying to wake to a CD-RW disc and you are awakened by

the Buzzer alarm instead, this is because the TOC on your CD-RW disc took

too long to read.

This is normal and not an indication of any problem with your unit.

Load the desired CD, begin playback and adjust the volume to the desired level.

Press the 

POWER ON/OFF

 button to shut the system ‘Off’.

Slide the 

ALARM 1

 and/or 

ALARM 2

 selector switches on the left side panel to the

MUSIC

 position. The 

ALM 1

 and or 

ALM 2

 indicators will appear in the display.

At the selected wake up time the CD will begin to play. It will continue for one hour,

or until the end of the disc, and then shut off automatically.

To stop the CD alarm sooner, press the 

STOP

 button or press the 

ALARM 1

and/or 

ALARM 2

 buttons on the front panel.

The Alarm will automatically repeat each day at the selected Wake Up time as

long as the 

ALARM 1

 and/or

 ALARM 2

 selector switches are set to the 

BUZZER

or 

MUSIC

 positions.

To cancel the alarms, slide the 

ALARM 1

 and/or 

ALARM 2

 selector switches to

the 

OFF

 position. The 

ALM 1

 and or 

ALM 2

 indicators go ‘Off’.

SNOOZE FUNCTION

After the alarm turns on in the morning you can use the Snooze function to grab a

few more minutes sleep before the alarm sounds again.

To activate the Snooze function press the 

SNOOZE

 button on the top cabinet, the

Snooze function will stop the alarm for 9 minutes and then turn the alarm on again.

The selected 

ALM 1

 and or 

ALM 2

 indicator flashes during Snooze operation.

The Snooze operation can be repeated several times within one hour. But after

one hour the alarm will not turn on again.

CKD3630_060404.p65

4/6/2004, 15:19

19

Summary of Contents for CKD3630


























Reviews: