background image

C6.2.41/0219/E

BENELUX

Josephinastraat 19

NL-6462 EL Kerkrade

Tel: +31 45 535 06 73

Fax: +31 45 535 06 71

benelux.sales@emerson.com

UK & IRELAND

Unit 17, Theale Lakes Business Park

Reading, Berkshire RG7 4GB 

Tel: +44 1189 83 80 00

Fax: +44 1189 83 80 01

uk.sales@emerson.com

BALKAN

Selska cesta 93

HR-10 000 Zagreb

Tel: +385 1 560 38 75

Fax: +385 1 560 38 79

GERMANY, AUSTRIA & SWITZERLAND

Senefelder Str. 3

DE-63477 Maintal

Tel: +49 6109 605 90

Fax: +49 6109 60 59 40

SWEDEN, DENMARK, NORWAY & FINLAND

Pascalstr. 65

DE-52076 Aachen

Tel: +49 2408 929 0

Fax: +49 2408 929 525

nordic.sales@emerson.com

FRANCE, GREECE & MAGHREB

8, Allée du Moulin Berger

FR-69134 Ecully Cédex, Technoparc - CS 90220

Tel: +33 4 78 66 85 70

Fax: +33 4 78 66 85 71

EASTERN EUROPE & TURKEY

Pascalstr. 65

DE-52076 Aachen

Tel: +49 2408 929 0

Fax: +49 2408 929 525

easterneurope.sales@emerson.com

ROMANIA & BULGARIA

Parcul Industrial Tetarom 2 

Emerson Nr. 4 400641 Cluj-Napoca

Tel: +40 374 13 23 50

Fax: +40 374 13 28 11

ro-bg.sales@emerson.com

ITALY

Via Ramazzotti, 26

IT-21047 Saronno (VA)

Tel: +39 02 96 17 81

Fax: +39 02 96 17 88 88

italy.sales@emerson.com

POLAND

Szturmowa 2

PL-02678 Warsaw

Tel.  

+48 22 458 92 05

Fax  

+48 22 458 92 55

poland.sales@emerson.com

MIDDLE EAST & AFRICA

PO Box 26382

Jebel Ali Free Zone - South, Dubai - UAE

Tel: +971 4 811 81 00

Fax: +971 4 886 54 65

mea.sales@emerson.com

ASIA PACIFIC

Suite 2503-8, 25/F., Exchange Tower

33 Wang Chiu Road, Kowloon Bay

Kowloon , Hong Kong

Tel: +852 2866 3108

Fax: +852 2520 6227

CZECH REPUBLIC

Hajkova 22 

CZ - 133 00 Prague 

Tel: +420 733 161 651

Fax: +420 271 035 655

Pavel.Sudek@emerson.com

SPAIN & PORTUGAL

C/ Pujades, 51-55 Box 53

ES-08005 Barcelona

Tel: +34 93 412 37 52

iberica.sales@emerson.com

RUSSIA & CIS

Dubininskaya 53, bld. 5

RU-115054, Moscow

Tel: +7 - 495 - 995 95 59

Fax: +7 - 495 - 424 88 50

ECT.Holod@emerson.com

For more details, see www.climate.emerson.com/en-gb

The Emerson logo is a trademark and service mark of Emerson Electric Co. Emerson Climate Technologies Inc. is a subsidiary of Emerson Electric Co.

Copeland is a registered trademark and Copeland Scroll is a trademark of Emerson Climate Technologies Inc.. All other trademarks are property of their respective owners.

Emerson Climate Technologies GmbH shall not be liable for errors in the stated capacities, dimensions, etc., as well as typographic errors. Products, specifications, designs and 

technical data contained in this document are subject to modification by us without prior notice. Illustrations are not binding.
© 2019 Emerson Climate Technologies, Inc.

Emerson Commercial & Residential Solutions

Emerson Climate Technologies GmbH - Pascalstrasse 65 - 52076 Aachen, Germany

Tel. +49 (0) 2408 929 0 - Fax: +49 (0) 2408 929 570 - Internet: www.climate.emerson.com/en-gb

Connect with us:facebook.com/EmersonCommercialResidentialSolutions

Summary of Contents for Copeland Scroll ZR24KRE





























Reviews: