Emerson CROFTON CF790BS00 Owner'S Manual Download

Page: 25 / 28

emersonfans.com

Please contact 1-800-654-3545 for further assistance

ETL Model No.: CF790

13. Repair Parts Listing

Before discarding packaging material, be certain all parts have been removed.

HOW TO ORDER REPAIR PARTS

WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE FOLLOWING INFORMATION:

•  PART NUMBER
•  NAME OF ITEM
•  PART DESCRIPTION
•  MODEL NUMBER

The model number of your Fan will be found on a label attached to the top housing.

For repair parts, phone 1-800-654-3545.

Model Numbers

Key

No. Description CF790BS00 CF790SW00 CF790VNB00 CF790VS00

* Hanger Ball Assembly, Consisting of: 761655-17 761655-92 761655-89 761655-93

1 Hanger Bracket (1) — — — —

2 Hanger Ball (1) — — — —

3 4.5” Downrod Assembly (1) — — — —

4 Ceiling Canopy (1) 764625-BS 764625-SW 764625-VNB 764625-VS

5 Motor Coupler Cover (1) 764626-BS 764626-SW 764626-VNB 764626-VS

6 Fan Blade Flanges (5) 764630-BS 764630-SW 764630-VNB 764630-VS

7 Fan Blades (5) 764634-WA/DM 764634-SW/MP 764634-WA/DM 764634-WA/RW

8 Switch Housing Adapter (1) 764636-BS 764636-SW 764636-VNB 764636-VS

9 Switch Housing (1) 764637-BS 764637-SW 764637-VNB 764637-VS

10 Wiring Harness (1) 764638-BL 764638-W 764638-BL 764638-BL

11 Receiver (1) RCFP RCFP RCFP RCFP

12 SW405 Wall Control w/Hardware (1) SW405 SW405 SW405 SW405

* Parts Bag Containing: 764639-CRM 764639-CRM 764639-BL 764639-BL

13 Threaded Studs, #8-32 x 1-1/4” (2) — — — —

14 Lockwashers, #8 External Tooth (2) — — — —

15 Knurled Knobs, #8-32 (2) — — — —

16 Wire Connectors (3) — — — —

17 Clevis Pin (1) — — — —

18 Hairpin Clip (1) — — — —

19 #8-32 x 5/16” Flat Head Screw

(spare) (1) — — — —

20 #8-32 x 5/16” Round Head Screw

(spare) (1) — — — —

21 1/4-20 x 1/2” Round Head Screws

w/Lockwashers (11) — — — —

22 #10-32 x 1/4” Washer Head

Screws (16) — — — —

23 Balancing Kit (1) — — — —

— Owner's Manual BP7494 BP7494 BP7494 BP7494

Summary of Contents for CROFTON CF790BS00





























Search results

Summary of Contents for CROFTON CF790BS00

Reviews:

Related manuals for CROFTON CF790BS00

Brands by name

Popular brands

Emerson CROFTON CF790BS00, Owner'S Manual

Search results

Summary of Contents for CROFTON CF790BS00

Reviews:

Related manuals for CROFTON CF790BS00

Brands by name

Popular brands