2.3
Configuration with AMS Device Manager
2.3.1
Configure wireless network credentials in AMS Device
Manager
Prerequisites
Before performing operations in AMS Device Manager, first scan the CSI 9420 with a wired
HART modem. Right-click the HART Modem icon
in Device Explorer and select
Scan All
Devices
.
Note
Configuring the wireless network is only applicable using a wired HART modem and cannot be done
using WirelessHART devices.
Procedure
1.
Right-click the CSI 9420 device and select
Methods
>
Join Network
.
2.
Enter the network ID for the wireless network in the Join Device to Network screen
and click
Next
.
You can obtain the network ID from the Smart Wireless Gateway web server. Click
Setup
>
Network
>
Settings
.
3.
Enter the Join Key in the screens that follow, and click
Next
.
4.
Select the
Accept new join key
option, and click
Next
.
5.
Click
Finish
when done.
Configuration
34
MHM-97408, Rev 15
Summary of Contents for CSI 9420
