1592010820 XWE B5000 PRO STP GB r1.0 25.11.2020.docx XWEB5000 P RO
9/20
LED
LED
Colour
Description
Pwr
Green
On when the system is powered
HDD
Blue
On when the disc executes physical writing operations
Rec
Blue
On when the system is recording data
Ser1/Ser2
Blue
On when the system is reading and/or writing on serial port 485
Mdm
Blue
On when the system runs operations with the analogue modem
DI1/DI2
Blue
On when the system detects the digital input as being active
Aux1/Aux2/Aux3
Blue
On when the system sets the relay output as active
Alarm
Red
On when the system detects an alarm
XWEB-EVO can also operate without having a screen, mouse and keyboard attached. For ex ample, it is
possible to use this initial system installation configuration and then disconnect them definitively if y ou only
intend to set up access from the remote station. If you intend to use external p eripheral d evices, always
connect them to the unit bef ore turning it on. Caution: always and only connect the external peripheral
devices bef ore turning on XWEB-EVO. If necessary, consult the instructions manual f or the individual
connected device.
When the system has been launched, the home page will appear (also known as t he login page) o n t he
screen connected to XWEB-EVO. Enter user name and password to login.
Note that the user interface for the connection is always the same, regardless of what t ype of acc ess has
been set up: local PC, Intranet or Internet.
