Your product will be repaired or replaced, at our option, for the
same or similar model of equal value if examination by the service
center determines this product is defective. Products received
damaged as a result of shipping will require you to file a claim with
the carrier.
The shipping address of the authorized service center is:
Southern Telecom, Inc.
Attention: Customer Service (2nd Floor)
14-C 53rd Street
Brooklyn, NY 11232
Should you have any questions or problems concerning this
product, please contact our customer service department at:
Customer Support:
1-877-768-8483 (Toll Free)
cs@southerntelecom.com
Monday - Thursday: 9AM - 5PM (EST)
Friday: 9AM - 3PM (EST)
www.southerntelecom.com
In the unlikely event that this product is defective, or does not
perform properly, you may within ninety (90) days from your
original date of purchase return it to the authorized service center
for repair or exchange.
TO OBTAIN WARRANTY SERVICE:
●
Provide proof of the date of purchase within the package (Dated
bill of sale).
●
Prepay all shipping costs to the authorized service center, and
remember to insure your return.
●
Include a return shipping address (no P.O. Boxes), a telephone
contact number, and the defective unit within the package.
●
Describe the defect or reason you are returning the product.
FCC Part 15:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Warning:
Changes or modifications to this equipment not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the
requirements for a Class B digital device under Part 15 of the Federal Commu-
nications Commission (FCC) rules. These requirements are intended to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
●
Reorient or relocate the receiving antenna.
●
Increase the separation between the equipment and receiver.
●
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
●
Consult the dealer or an experienced radio/TV technician for help.
Warranty service not provided
This warranty does not cover damage resulting from accident, misuse, abuse,
improper installation or operation, lack of reasonable care, and unauthorized
modification. This warranty is voided in the event any unauthorized person opens,
alters or repairs this product. All products being returned to the authorized service
center for repair must be suitably packaged.
Limitation of Warranty:
• THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS
PRODUCT. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (INCLUDING ALL
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR WRITTEN INFORMATION
GIVEN BY AIT, INC. IT’S AGENTS, OR EMPLOYEES SHALL CREATE A GUARANTY OR IN
ANY WAY INCREASE THE SCOPE OF THIS WARRANTY.
•
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE
REMEDY OF THE CONSUMER. AIT, INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR
ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS
PRODUCT. THIS DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE
GOVERNED BY THE LAWS OF THE STATE OF NEW YORK. EXCEPT TO THE EXTENT
PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE
APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.
Some states do not allow the exclusion nor limitation of incidental or consequential
damages, or limitations on how long an implied warranty lasts so the above
limitations or exclusions may not apply to you. This warranty gives you specific legal
rights, and you also may have other rights that vary from state to state.
• We recommend using a tripod (not included) when using your camera as a webcam.
• When you set the camera to PCCAM, you will not be able to access the files on the card when
connecting the camera to your computer. Make sure to set it back to its default setting by
selecting
“USB”
and then
“MSDC”
in the system settings.
Limited Warranty
Troubleshooting
MAGIX Photo and video suite
Webcam feature
Connecting the camera
Please do not disconnect the USB cable during loading, as it may cause damage to the
camera and the files on the SD card.
1. Connect the camera to your computer using the provided USB cable.
1. Turn on the camera and press the
[MENU]
button.
2. Press the
[ ]
button and select
[ ]
to enter the
System Settings
Screen
.
3. Use the
[ ]
button to scroll down to
“USB”
and press the
[ ]
button.
4. Select
“PCCAM”
and press the
[OK]
button.
5. Press the
[MENU]
button once again to exit the
System Settings
.
6. When you connect the camera, it will be recognized by your computer
as webcam.
Using your camera as a WebCam
To edit or upload and share your videos and pictures, you must first transfer
them to your computer. Follow the steps below to connect the camera to your
computer, and use the provided ArcSoft® software to manage, view, edit and
share your videos and pictures.
1. Make sure the camera is turned off, and that an SD or SDHC card is inserted in
the camera before connecting it to your computer.
2. Insert the smaller end of the USB cable into the camera’s USB port.
3. Connect the larger end of the USB cable into your computer’s USB port.
4. Turn ON the camera.
5. Look for your camera by clicking on
“My Computer”
, it should usually appear
as
“Removable Disk”
. When a SD card is inserted, you will see two drives
listed as
“Removable Disk”
Select a file on your camera or SD card, and
simply move it into your computer (we recommend copying the files into the
“My Videos”
or
“My
Pictures”
folder of your computer) in the usual way (drag-and-drop,
copy-paste),
OR
open the ArcSoft®software to easily locate your camera and
transfer, view, edit, and upload your video and picture files (see
“ArcSoft®
MediaImpression”
).
6. Before disconnecting the camera, click on the
“Safely Remove Hardware”
icon usually located on the lower right corner of your desktop.
Connect your camera to a computer
2. Select a video and click on the Media Player icon.
3. The video will load and begin to play.
Select a video.
Uploading videos to YouTube™
Main Screen
1. From the Main Screen click on “
Video
”.
2. Select a video.
3. Click on the YouTube™ icon.
Main Screen
1. From the
Main Screen
select “
Pictures
”
Viewing pictures on your computer
2. Select a picture, and click on the
“
Photo Viewer
” icon.
3. Within the
Photo Viewer Screen
you can:
• Zoom in or out of a picture
• Start or pause a slide show
• Move to the previous or next picture
• Adjust the slide show settings
• Rotate a picture
• Eliminate Red Eye
• Delete
Photo Viewer Screen
Emailing Pictures
1. Select a picture, and click on the “
Easy Email
” icon.
Installing the Webcam Driver.
Select a picture
2. Adjust the settings according to your preference, and click “
Attach to Email
”
Adjust settings
Attach to Email
5. Select a destination on your computer where you
would like to transfer the videos or pictures by clicking
on the “
Destination Folder
” drop down window. We
recommend transferring the files to either your computer’s
Desktop
, or the “
My Videos
” or “
My Pictures
” folders,
where you can easily access and find your videos and
pictures.
Browse a destination
6. Click “
Import
”
Destination Folder
Import
4.
Enter your
YouTube™ username and password
(mark the checkboxes to save the username
and password for future uploads), and click
“
Login
”
5. Enter the required information and click “
Upload
”.
6. If the video successfully uploaded,
you will see the message below.
Upload Window
Upload
7. If you wish to delete the original files from the camera select “
Delete Original Files
”,
otherwise just click “
Done
”.
1. From the
Main Screen
click on “
Video
”.
(To return to the main screen, click on
“Go to Start Page”
.
Viewing videos on your computer
Main Screen
Video
Done
ArcSoft® MediaImpression
Installing
Transferring videos and pictures from the camera to
your computer
Install the included ArcSoft® MediaImpression software before connecting the camera
to your computer. With this software you will be able to manage, view, edit, transfer,
and easily upload / share your videos and pictures. Follow the instructions below to
install the MediaImpression software onto your computer.
1. Insert the provided CD into the CD-ROM drive of your computer, and click on
“
Install MediaImpression
”.
2. Click “
Next
” when prompted and “
Finish
”.
3. To open MediaImpression, click on the
MediaImpression
icon on your
Desktop
.
Installation CD
4. In the “
Get Media from
” drop down
window, find your camera.
(Usually displayed as “
Removable Disk
”)
1. Connect and turn on the camera.
2. Open Media Impression.
3. Click “
Import
”.
Removable Disk
ArcSoft® MediaImpression
Computer
• For more information regarding
ArcSoft’s MediaImpression software,
click “
Extras
” (located on the upper right
hand corner) and then click
“Help”
.
