– 14 –
EN
0C28
DELETING (OR ADDING)
CHANNEL(S)
The channels you no longer receive or seldom watch
can be deleted from the memory. (Of course, you can
add the deleted channel into the memory again.)
1
Select “CHANNEL SET UP”
Press SETUP on the remote control.
Press Arrow (
K
/
L
) to point to
“CHANNEL SET UP”.
Then press ENTER.
2
Select “ADD/DELETE CH”
Press Arrow (
K
/
L
) to point to
“ADD/DELETE CH”.
Press ENTER.
3
Enter the desired channel number
Press Arrow (
K
/
L
) until your
desired channel number appears.
(You can also use the number but-
tons or CHANNEL(CH.)
K
/
L
to
enter it) (Example: CH8)
•
You must precede single-digit
channel numbers with a zero (Example: 02 ... 09).
•
When selecting cable channels which are higher
than 99, press +100 first, then press the last two
digits. (Example: to select channel 125, first press
+100, then press 2 and 5).
4
Delete (or add) it from (into) memory
Press ENTER. The channel number changes to light
red. The channel is deleted from memory.
•
To delete another channel, repeat steps [3] and [4].
•
If you press ENTER again, the channel is memo-
rized again.
5
Exit the channel setup mode
Press SETUP to return to TV mode.
NOTE:
To confirm that channel(s) has been deleted
or added, press CHANNEL(CH.)
K
/
L
.
TV
- TV SETUP -
B
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
Added channel: Light blue.
Deleted channel: Light red.
08
ADD / DELETE
– CHANNEL SET UP –
B
ADD / DELETE CH (CATV)
AUTO CH PROGRAMMING
Summary of Contents for EWC13D4
Page 39: ... 39 ES 0C28 MEMO ...
