background image

- 17 -

EN

1C29

DAYLIGHT-SAVING TIME

Select this feature and the TV/VCR/DVD’s clock
automatically will advance one hour in April, then
reverse one hour in October.
When Daylight-Saving Time is ON, the clock will
change automatically as follows:

First Sunday of April :

At 2 AM the clock imme-

diately changes to 3 AM. Any timer programming
you have set to occur between 2 AM and 3 AM
will not record.

Last Sunday of October :

At 2 AM the clock

immediately changes to 1 AM.

Make sure ...

Press the POWER button to turn on the TV/VCR/DVD.

1

Select “SETTING CLOCK”

Press the SETUP button on the
remote control.
Press the Arrow button 

K

or 

L

to

point to “SETTING CLOCK”.
Then press the ENTER button.

2

Set “D.S.T.” (Daylight-Saving Time) to [ON]

Press the Arrow button 

K

or 

L

to

point to “D.S.T.”.
Then press the ENTER button until
[ON] appears.

3

Exit the Daylight-Saving Time mode

Press the SETUP button on the remote control to
return to TV mode.

TO CANCEL THE DAYLIGHT-SAVING
TIME

Repeat steps [1] to [2], select [OFF] using the
ENTER button.

– M E N U –

TIMER PROGRAMMING
PICTURE CONTROL

B

SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE  [ENGLISH]
CAPTION  [OFF]
ZERO RETURN
TIME SEARCH

– SETTING CLOCK –

AUTO CLOCK

[ON]

AUTO CLOCK CH SEARCH
AUTO CLOCK CH

[ 02 ]

MANUAL CLOCK SET

B

D.S.T.

[ON]

NOTE: 

During Auto Clock CH Search, the picture

may be distorted, this is normal.

4

Enter the channel number that contains the
Automatic Clock Setting Signal

Press the SETUP button on the remote control.
Press the Arrow button 

K

or 

L

to

select “SETTING CLOCK”.
Press the ENTER button to enter
“SETTING CLOCK” menu.
Press the Arrow button 

L

to select

“AUTO CLOCK CH”. 
Press the ENTER button or the
Arrow button 

or 

B

until you

locate Auto Clock Set station num-
ber. See step [3] on page 16.
Press the SETUP button to exit the
screen.

5

Turn off the TV/VCR/DVD

Once the TV/VCR/DVD is turned off , it will period-
ically check and set the correct date and time.

– SETTING CLOCK –

AUTO CLOCK

[ON]

AUTO CLOCK CH SEARCH

B

AUTO CLOCK CH

[  45]

MANUAL CLOCK SET
D.S.T.

[OFF]

– M E N U –

TIMER PROGRAMMING
PICTURE CONTROL

B

SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE  [ENGLISH]
CAPTION  [OFF]
ZERO RETURN
TIME SEARCH

TV/VCR

Summary of Contents for EWC27T4

























































Reviews: