Instruction Manual
D101329X012
1078 Actuator
June 2017
10
Parts Ordering
When corresponding with your
Emerson sales office
or Local Business Partner, indicate the type number and size of the
power actuator and the mounting adaptation used. If the manual actuator was shipped separately (not attached to a
power actuator), give the serial number of the unit, which is shown on a tag attached to the manual actuator.
For 1052 (size 70), and 1061 (sizes 30, 40, 60, 68, 80, and 100),
indicate valve shaft size.
WARNING
Use only genuine Fisher replacement parts. Components that are not supplied by Emerson Automation Solutions should
not, under any circumstances, be used in any Fisher valve, because they may void your warranty, might adversely affect the
performance of the valve, and could cause personal injury and property damage.
Parts List
Note
Contact your
Emerson sales office
or Local Business Partner for Part
Ordering information.
Manual Actuator Assembly
(figures 3 and 4)
Key
Description
1
Actuator
2
Handwheel
3
Pin, steel
Note
A new lever and splined adaptor (figure 5) are needed on most
assemblies for field installation of the 1078 onto the 1052 size 70, and
1061 sizes 30, 40, 60, 68, 80, & 100 actuators.
Key
Description
4
Travel Indicator scale, stainless steel
5
Travel Indicator Pointer, stainless steel
6
Machine Screw, steel (2 required)
9
Shaft Adaptor
Field Mounting Parts
For 1061; and 1052 Size 70 Actuators
Note
Most assemblies require installation of a new lever to complete the
installation. Contact your Emerson sales office.
Description
Lever
