background image

Table 3.

 Main Valve Minimum Differential Pressures

(1)

17E68 NITRILE (NBR)

17E97

(1)

 NITRILE (NBR)

17E88 FLUOROCARBON (FKM)

-28 to 66°C / -20 to 150°F 

-17 to 66°C / 0 to 150°F

-17 to 121°C / 0 to 250°F

(2)

1. The DN 150 / NPS 6, 17E97 diaphragm will perform in gas temperatures as low as -29°C / -20°F.

2. For differential pressures above 27.6 bar / 400 psig diaphragm temperature is limited to 66°C / 150°F.

Table 4.

 Temperature Capabilities

MAIN VALVE  

BODY SIZE

MAIN SPRING PART 

NUMBER AND 

COLOR CODE

DIAPHRAGM 

MATERIAL

MINIMUM DIFFERENTIAL, PERCENT OF CAGE CAPACITY

FOR 90% CAPACITY

FOR 100% CAPACITY

100% Trim

60% Trim

30% Trim

100% Trim

60% Trim

30% Trim

DN

NPS

bar

psi

bar

psi

bar

psi

bar

psi

bar

psi

bar

psi

25

1

19B2400X012, Light Blue

17E68 and 17E88

1.7

24

2.0

29

2.2

31

1.7

24

2.2

31

2.8

40

GE12727X012, Black

17E97

2.5

35

2.7

38

2.9

42

2.5

35

2.7

39

3.6

52

17E68 and 17E88

2.1

30

2.4

35

2.7

39

2.1

30

2.5

36

3.6

52

19B2401X012, 

Black with White Stripe

(3)

17E88 and 17E97

3.0

43

3.4

50

3.9

56

3.0

43

3.7

53

4.7

68

50

2

19B0951X012, Yellow

(2)

17E68 and 17E88

0.83

12

1.0

15

1.0

15

0.83

12

1.7

25

1.4

20

18B2126X012, Green

17E97

1.7

24

1.7

25

1.8

26

1.7

24

2.1

30

2.6

37

17E68 and 17E88

1.2

18

1.4

20

1.5

22

1.3

19

1.8

26

1.9

28

18B5955X012, Red

(3)

GE05504X012, Purple

(3)

17E88 and 17E97

2.0

29

2.0

29

2.1

31

2.1

31

2.4

35

3.03

43

80

3

T14184T0012, Yellow

(2)

17E68 and 17E88

1.1

16

1.3

19

1.7

24

1.6

23

1.6

23

2.0

29

19B0781X012, Light Blue

17E97

1.6

23

1.6

23

1.6

23

1.6

23

1.6

23

1.7

25

17E68 and 17E88

1.5

21

1.5

22

1.9

28

1.9

28

1.9

28

2.3

33

19B0782X012, Black

(3)

17E88 and 17E97

2.2

32

2.3

33

3.0

43

2.6

38

2.6

38

3.4

50

100

4

T14184T0012, Yellow

(2)

17E68 and 17E88

0.69

10 

0.83

12 

0.97

14 

1.7

25 

1.7

25 

1.7

25 

18B8501X012, Green

17E97

1.1

16 

1.2

17 

1.5

21 

2.3

34 

2.3

34 

2.3

34 

17E68 and 17E88

1.1

16 

1.2

17 

1.4

20 

2.1

30 

2.1

30 

2.1

30 

18B8502X012, Red

(3)

17E88 and 17E97

1.5

21 

1.7

24 

1.8

26 

2.8

40 

2.8

40 

2.8

40 

150

6

19B0364X012, Yellow

(2)

17E97

0.69

10

0.76

11

0.97

14

0.83

12

1.1

16

1.1

16

17E88

0.69

10

0.90

13

0.90

13

0.83

12

1.5

21

1.5

21

19B0366X012, Green

17E97

0.97

14 

1.5

22 

1.5

22 

1.3

19 

2.0

29

2.0

29 

17E88

1.2

17

1.5

21

1.5

21

1.4

20

2.5

36

2.5

36

19B0365X012, Red

(3)

17E88 and 17E97

1.6

23 

2.0

29 

2.0

29 

2.1

30 

2.8

41 

2.8

41 

200

8

GE09393X012, Yellow

(2)

17E97 

1.1

16

- - - -

- - - -

1.3

19

- - - -

- - - -

GE09396X012, Green

1.4

20

1.6

23

GE09397X012, Red

(3)

1.8

26

2.1

30

1. See Table 1 for structural design ratings, Table 3 for pilot ratings and Table 6 for maximum pressure ratings.

2. The white and yellow springs are only recommended for inlet pressures under 6.9 bar / 100 psig.

3. The red, black, purple, red stripe and black with white stripe springs are only recommended for applications where the maximum inlet pressure can exceed 34.5 bar / 500 psig.

Adjustment

To change the set pressure, remove closing cap 

or loosen the locknut and turn the adjusting screw 

clockwise to increase set pressure or counterclockwise 

to decrease pressure. Monitor the set pressure with a 

test gauge during the adjustment. Replace closing cap 

or tighten the locknut to maintain the desired setting.

Taking Out of Service (Shutdown)

!

WARNING

To avoid personal injury resulting from 

sudden release of pressure, isolate the 

backpressure regulator from all pressure 

before attempting disassembly.

If pressure is introduced first to the 

main valve before the pilot, the main 

valve may go wide-open and subject the 

downstream system to full inlet pressure.

Type EZR Relief

3

Summary of Contents for Fisher EZR Relief









Reviews: