10
RXi
–
Panel PC Quick Start Guide
GFK-3072D
Installation Steps
1.
Verify that the gasket is present and properly seated in the bezel channel located on the sides of the unit.
2.
Carefully insert the Panel PC into the mounting panel cutout.
Figure 6: Panel Install View
3.
Insert the hook of the mounting bracket into the mounting hole as displayed in the following figure.
Figure 7: Mounting Bracket Insertion
4.
Tighten all mounting brackets by hand until the gasket seal contacts the mounting surface uniformly.
5.
In a cross pattern around the monitor tighten all mounting clip screws to a torque of 13 to 13.9 in-lbs. (15
to 16kgf-cm) making sure not to overtighten the bracket.
Figure 8: Tighten Mounting Bracket
Summary of Contents for GFK-3072D
