13
PRESETTING STATIONS IN MEMORY
Up to 10 AM and 10 FM stations can be stored into the Preset memories. They will
remain in memory as long as the batteries are installed.
1.) Slide the FUNCTION switch to RADIO position.
2.) Press the BAND button to select AM or FM band, press the
or
button to
tune a station.
3.) Press the MEMORY button – the PROG indicator
blinks.
4.) While the PROG indicator is blinking: Press one
of the Preset buttons to store that station in Presets
M1 – M5. Example: M4.
5.) To store stations in Presets M6 through M10, tune to the desired station, press
the MEMORY button, press the M+5 button and then one of the Preset buttons.
Example: To store a station in Preset M7, press buttons “M+5” and “M2”.
Note: You must press a Preset button within 5 seconds while the PROG indicator
is blinking, otherwise the station will not be memorized.
NOTE:
Before you disconnect the power (AC and Battery) of the set, make sure to
press POWER OFF button to turn power ‘Off’, then you have approximately 30
seconds to reconnect the power. Otherwise, the memories may be lost and need
to be re-programmed.
HD7100_ib_0422.p65
22/4/2002, 11:43
13
