15
PROGRAMMED PLAYBACK
You can program up to
20
tracks on a disc to play in any desired order.
NOTE:
You cannot program a disc during playback. If the disc is playing press the
STOP
button first to stop playback and then follow the programming steps below.
1.) While the total tracks and playing time appear
on the display press the
PROG/EQ
button
once. The
PROG
indicator and the Program
Number (
P – 01
) appear, and the track number
(
000
) flashes.
2.) Press the
SKIP FWD
or
SKIP REV
button to
select the first track to be programmed.
Example: Track 2.
3.) When the desired track number is flashing in
the display press the
PROG/EQ
button again
to enter the desired track number in Program
Number 1. The track number returns to “
000
”
and the Program Number advances to “
P – 02
”.
4.) Repeat Steps 2 and 3 to program additional tracks up to a maximum of 20.
5.) Press the
PLAY/PAUSE
button to begin
programmed playback. The
PROG
indicator
remains in the display and the track display
stops flashing. Playback begins with the first
track you programmed and continues until all programmed tracks have been
played, and then the player stops. The programmed sequence will remain in
the memory until the power shuts off (approximately 20 seconds) or until the
CD door is opened. If you press the
PLAY/PAUSE
button again before the
power shuts off the programmed sequence will play again.
STOP
STOP
STOP
PLAY
HD8120_022004.p65
20/2/2004, 11:23
15