10. Screw in two 60-watt medium base
bulbs into the light fitter sockets
(Figure 18). Place the lower glass and
then the decorative cap over the
threaded nipple. Install the finial nut
and securely tighten.
11. Your ceiling fan is now installed and
wired to be controlled by your remote
control system.
8. Connect the white wire from the light fit-
ter to the white wire from the motor
(Figure 16). Connect the black wire
from the light fitter to the black wire
from the motor. Make sure connectors
are fully engaged.
9. Position the adapter/light fitter assem-
bly over the adapter plate and secure
using three 8-32 x 12mm pan head
screws (Figure 17).
BLACK
WIRE
WHITE
WIRE
LIGHT FITTER
ADAPTER
PLATE
ADAPTER
Figure 16
11
8-32 x 12mm PAN HEAD
SCREW (3)
ADAPTER/
LIGHT FITTER
ASSEMBLY
Figure 17
DECORATIVE
CAP
FINIAL NUT
THREADED
NIPPLE
LOWER GLASS
SOCKET
LIGHT FITTER
60-WATT MEDIUM BASE
BULB (2)
Figure 18
Emerson High Country 3/10/05 9:32 AM Page 11
