background image

25

English

Child and Ratings Lock

You can prevent your children from watching certain Programs or 
certain Channels by locking the TV Controls and by using Ratings.

1

Use 

ɼɾ

 to select 

Child lock

, then press 

OK

.

2

Use 

the NUMBER keys

 to enter the 4-digit numbers for your PIN 

code.
• When you have not set up your PIN code, enter 

0, 0, 0, 0

.

• When the PIN code is correct, 

Child lock

 menu is displayed.

See the following description for setting each item.

Channel lock

Particular Channels or External Input modes can be invisible in this 
function.

3

Use 

ɼɾ

 to select 

Channel lock

, then press 

OK

.

4

Use 

ɼɾ

 to select the particular Channels or External Input, then 

press 

OK

 repeatedly to switch between View and Block.

 

indicates that the Channel or Input Source is Locked.

 

indicates that the Channel or Input Source is Not Locked.

Note(s)

• Closed Caption will NOT be displayed when you are using an HDMI connection.

Digital caption service

 that you can switch differs depending on the broadcast 

description.

• Caption Style will not have any effect if the User setting is set to Off.

• Closed Captioning Service may not be controlled by this unit’s Menu Options if you 

are watching television through an External Cable or Satellite Set-top Box. In which 

case you will need to use the Menu Options on the External Set-top Box to control 

Closed Captioning.

• The captions do not always use correct spelling and grammar.

• Not all TV Programs and Product Commercials include Closed Caption information 

or all types of the Closed Captioning. Refer to your area TV program listings for the 

TV channels and times of Closed Caption shows. The captioned programs are usually 

noted in the TV listings with abbreviations such as 

CC

.

• Not all captioning services are used by a TV channel during the transmission of a 

Closed Caption program.

• To show the Closed Caption on your TV screen, broadcast signal must contain the 

Closed Caption data.

• Captions and Texts may not exactly match the TV voice.

• Changing Channels may delay the Closed Caption for a few seconds.

• Adjusting or Muting the Volume may delay the Closed Caption for a few seconds.

• Abbreviations, symbols and other grammatical shortcuts may be used in order to keep 

pace with the on-screen action. This is not a malfunction.

• The caption or Text characters will not be displayed while the Main Menu or Functions 

Display is shown.

• If a black box appears on the TV screen, this means that the Closed Caption is set to 

the text mode. To clear the box, select 

CC-1

CC-2

CC-3

, or 

CC-4

.

• If the unit receives poor quality television signals, the captions may contain errors or 

there might be no captions at all. Some possible causes of poor quality signals are:

– Automobile ignition noise

– Electric motor noise

– Weak signal reception

– Multiplex signal reception (ghosts or screen flutter)

– Data dropout and Pixelation (for DTV only)

• The unit retains the Closed Caption setting if the power fails.

• When the unit receives special effects playback signal (e.g. Search, Slow and Still) from 

a VCR’s video Output channel (ch3 or ch4), the unit may not display the correct 

caption or text.

• The EUT setting that satisfies § 79.102 (e) is as follows:

Font: Mono-font

Character size: Large

Picture

Sound

Setup

Features

Language

USB

Caption settings

Child lock

PC settings

fun-Link (HDMI CEC)

Location

E-sticker

Software upgrade

Home

- -

Note(s)

• When you select a rating and set it to   or  , the higher ratings will be blocked 

automatically. The lower ratings will be available for viewing.

• When you set the highest rating to  , all ratings turn to   automatically.

• To block any inappropriate programs, set your limits in 

US movie ratings lock

US TV 

ratings lock

 and 

Region ratings lock

.

• The Child Lock setting will be retained after a power failure or after the power is 

removed for longer than 10 seconds (except the PIN code reverts to 0000).

Child and Ratings Lock

 

 p.25

Region ratings lock

 and 

Clear region ratings lock

 will be available when the unit 

receives a Digital broadcast using the new rating system.

• For the United States, the unit may download the Region Ratings Lock Table, if 

required.

• The Canadian rating systems on this unit are based on CEA-766-A and CRTC policy.

Picture

Sound

Setup

Features

Language

USB

Channel lock

US movie ratings lock

US TV ratings lock

Canadian English rating

Canadian French rating

Region ratings lock

Clear region ratings lock

Change PIN

Picture

Sound

Setup

Features

Language

USB

HDMI1

HDMI2

Video

PC

40.1

40.2

DTV

DTV

Continued on next page.

Summary of Contents for LF320EM4






































Reviews: