Emerson Liebert APS User Manual Download

Page: 10 / 104

Important Safety Instructions

Liebert

APS

™

ELECTROMAGNETIC COMPATIBILITY

—The Liebert APS complies with the limits of Category

C2, pursuant to IEC/EN/AS 62040-2, and for a Class A digital device, pursuant to Part 15 of FCC

rules. Operation is subject to the following conditions:

• The output cables shall be no longer than 10m (32ft).
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause

undesired operation. Operating this device in a residential area is likely to cause harmful

interference that users must correct at their own expense.

The Liebert APS complies with the requirements of EMC Directive 2004/108/EC and the published

technical standards. Continued compliance requires installation in accordance with these

instructions and use of accessories approved by Emerson.
Operate the UPS in an indoor environment only in an ambient temperature range of 0-40°C

(32-104°F). Install it in a clean environment, free from moisture, flammable liquids, gases and

corrosive substances.
Do not continue to use the UPS if the front panel indications are not in accordance with these

operating instructions or the UPS performance alters in use. Refer all faults to your local service

dealer.
Servicing of batteries should be performed or supervised by personnel knowledgeable of batteries and

the required precautions. Keep unauthorized personnel away from the batteries. Proper disposal of

batteries is required. Refer to your local laws and regulations for disposal requirements.
Never block or insert any object into the ventilation holes or other openings.
DO NOT CONNECT equipment that could overload the UPS or demand DC current from the UPS,

for example: electric drills, vacuum cleaners, laser printers, hair dryers or any appliance using half

wave rectification.
Storing magnetic media on top of the UPS may result in data loss or corruption. Turn Off and isolate

the UPS before cleaning it. Use only a soft dry cloth; never use liquid or aerosol cleaners.

Information for the Protection of the Environment

UPS SERVICING

—This UPS makes use of components dangerous for the environment (electronic

cards, electronic components). The components removed must be taken to specialized collection and

disposal centers.

NOTICE TO EUROPEAN UNION CUSTOMERS: DISPOSAL OF OLD

APPLIANCES

—This product has been supplied from an environmentally aware

manufacturer that complies with the Waste Electrical and Electronic Equipment

(WEEE) Directive 2002/96/CE.
The crossed-out trash bin symbol at right is placed on this product to encourage

users to recycle components and units whenever possible. Please be

environmentally responsible and recycle this product through your recycling

facility at its end of life. Do not dispose of this product as unsorted municipal

waste. Follow local municipal waste ordinances for proper disposal provisions to

reduce the environmental impact of waste electrical and electronic equipment (WEEE).
For information regarding the scrapping/disposal of this equipment, please browse

www.eu.emersonnetworkpower.com

(Products section or Contact us section) or call Emerson’s

worldwide technical support.

• Toll Free Outside of North America: 00 80011554499
• Toll Number Based in Italy: +39 0298250222
• Toll Free in North America: 1-800-LIEBERT (1-800-543 2378)