Operation and Display Panel
25
Liebert
®
GXT4
™
3.4.1 Startup Screen
When the Liebert GXT4 is starting up, it initiates a self-test and displays the screen shown in
Figure 19
for about 10 seconds.
Figure 19 Startup screen
After about 10 seconds, the LCD shows one of the On screens in
Figure 20
; the screen shown depends
on whether input power is available.
Figure 20 Startup screens
To turn on the UPS, press either the Up or Down button to select
YES
and press the Enter button.
The UPS will start up, the LCD will display
UPS STARTING
and then
START SUCCESSFUL
after
the UPS is turned On, as shown in
Figure 21
.
Figure 21 Starting and Start Successful screens
EMERSON
Network Power
O/P: 0V HZ 0.0A
I/P : 230 V 50HZ 0.0A
BATT: 100 % 320 MINS
LOAD: 0%
TURN ON UPS
YES
NO
O/P: 0V 0HZ 0.0A
I/P : 230V 50HZ 0.0A
BATT: 100% 320MINS
LOAD: 0%
AC NOT AVAILABLE
START ON BATTERY?
YES
NO
Input Power is Available
Input Power is Not Available
O/P: 0V 0HZ 0.0A
I/P : 230V 50HZ 0.0A
BATT: 100% 320MINS
LOAD: 0%
UPS STARTING
O/P: 230V 50HZ 4.6A
I/P : 230V 50HZ 5.0A
BATT: 100% 15MINS
LOAD: 40%
START SUCCESSFUL
Summary of Contents for Liebert GXT4
Page 1: ...Liebert GXT4 208V 5000 10 000VA 6000RTL630 User Manual ...
Page 2: ......
