background image

Ensuring The High Availability
Of Mission-Critical Data And Applications.

While every precaution has been taken to ensure the accuracy and completeness of this literature, Liebert Corporation assumes 
no responsibility and disclaims all liability for damages resulting from use of this information or for any errors or omissions.
© 2010 Liebert Corporation
All rights reserved throughout the world. 
Specifications subject to change without notice.
® Liebert is the registered trademark of Liebert Corporation. All names referred to are trademarks or 
registered trademarks of their respective owners.

Locations

United States

1050 Dearborn Drive

P.O. Box 29186

Columbus, OH 43229

Europe

Via Leonardo Da Vinci 8

Zona Industriale Tognana

35028 Piove Di Sacco (PD) Italy

+39 049 9719 111

Fax: +39 049 5841 257

Asia

29/F, The Orient Square Building

F. Ortigas Jr. Road, Ortigas Center

Pasig City 1605

Philippines

+63 2 687 6615

Fax: +63 2 730 9572

The global leader in enabling 

Business-Critical Continuity

.

AC Power Systems 

Connectivity 

DC Power Systems 

Racks & Integrated Cabinets

Embedded Computing 

Embedded Power 

Power Switching & Control

Precision Cooling

Outside Plant

EmersonNetworkPower.com 

Services

Surge Protection

Technical Support / Service

Web Site

www.liebert.com

Monitoring

800-222-5877
Liebert.monitoring@emerson.com
Outside the US: 614-841-6755

Single-Phase UPS

800-222-5877
upstech@emersonnetworkpower.com
Outside the US: 614-841-6755

Three-Phase UPS

800-543-2378
powertech@emersonnetworkpower.com

Environmental Systems

800-543-2778
Outside the United States
614-888-0246

Emerson Network Power.

  

Infrastructure Management & Monitoring

Emerson, Business-Critical Continuity, Emerson Network Power  and the Emerson Network Power logo
are trademarks of Emerson Electric Co. or one of its affiliated companies.

©2010 Emerson Electric Co.

SL-28096_REV1_07-10

Summary of Contents for Liebert ICOM-DO













Reviews: