Emerson Liebert MicroPOD MP2-210K, User Manual

Important Safety Instructions

1

1.0

I

MPORTANT

 S

AFETY

 I

NSTRUCTIONS

SAVE THESE INSTRUCTIONS

This manual contains important instructions that should be followed during installation and opera-

tion of the Liebert MicroPOD.
This product is not intended for use with life support or other U.S. FDA designated “critical” devices.
Read all safety and operating instructions before operating the Liebert MicroPOD and the connected 

UPS system. Adhere to all warnings on the unit and in this manual. Follow all operating and user 

instructions.
Turn the UPS off and unplug the Liebert MicroPOD before cleaning. Use only a soft cloth, never liq-

uid or aerosol cleaners.
The UPS and Liebert MicroPOD are designed for data processing equipment. Do not plug laser print-

ers or appliances, such as hair dryers, heaters, vacuum cleaners or electric drills, into the UPS output 

receptacles.

The UPS and the Liebert MicroPOD are equipped with grounded plugs (plug types vary depending on 

model). Do not defeat the safety purpose of this plug. If unable to fully insert the plug into the desig-

nated receptacle, contact a qualified electrician or your local dealer or Emerson representative for 

assistance.
Route power supply cords so they are not walked on or pinched in anyway.

!

WARNING

Do not attempt to service this product yourself. Opening or removing the cover may expose 

you to dangerous voltages, even when the AC cord is disconnected from the electrical outlet. 

Refer all servicing to qualified service personnel.

!

WARNING

Do not modify the cables in any way. Consult your local Emerson representative if the AC 

cords do not match the mains receptacle. The Liebert MicroPOD must be grounded at all 

times while in use. Turn Off the UPS before unplugging Liebert MicroPOD.

!

CAUTION

Risk of electric shock, do not remove cover, no user serviceable parts inside. Refer servicing to 

qualified service personnel.

!

CAUTION

This device receives power from multiple sources. Before servicing this device, remove all 

connections. Before servicing the UPS, follow “Maintenance of UPS” instructions in the user 

manual for your UPS.

!

CAUTION

For use in a controlled environment. Refer to manual specifications for environmental 

conditions.

!

WARNING

When the Liebert MicroPOD is in mains position (maintenance bypass mode), the power to 

the connected load is not filtered or conditioned by the UPS.