Emerson Liebert MicroPOD MP2-210K, User Manual

Installation

5

4.2

Rack Mount Installation

1. Rack mount installation of the Liebert MicroPOD is possible with the use of the rack mounting 

brackets (shipped with the Liebert MicroPOD). See 

Figure 5

.

2. The rack mount brackets allow you to rack mount the Liebert MicroPOD in a 19" enclosure.
3. The Liebert MicroPOD can be mounted to face one of four directions depending on your 

application, utilizing the rack mount brackets provided.

4. Determine the desired position and direction for the Liebert MicroPOD, face it in that direction, 

then attach the brackets to the Liebert MicroPOD with the screws provided.

5. Consult your rack/enclosure manufacturer’s recommendations for specific rack mounting 

hardware that will be required.

6. The holes on the rack mount bracket are notched for easy installation. Tighten the Liebert 

MicroPOD securely to the rails and then follow the startup directions for the Liebert MicroPOD in 

4.1 - Installation on a Liebert GXT UPS

.

Figure 5

Liebert MicroPOD mounting bracket location

!

CAUTION

Before installing, open all branch rated circuit breakers at the nearest disconnect, turn UPS 

off and disconnect all cords to and from the UPS.

Mounting 

Bracket

Mounting Bracket