Emerson Liebert NX Remote Monitoring Panel, User Manual

1

I

MPORTANT

 S

AFETY

 I

NSTRUCTIONS

SAVE THESE INSTRUCTIONS

This manual contains important safety and operating instructions concerning the installation and 

operation of the Liebert NX Remote Monitoring Panel (RMP). Read all safety, installation and operat-

ing instructions before beginning installation. Adhere to all warnings on the unit and in this manual. 

Follow all operating and user instructions.
The Liebert NX Remote Monitoring Panel must be commissioned and serviced by an engineer 

approved by Liebert. Failure to do so may result in personnel safety risk, equipment malfunction and 

invalidation of warranty.
The Remote Monitoring Panel is designed and intended for commercial and industrial use. It is not 

recommended for use in life-support applications.

ELECTROMAGNETIC COMPATIBILITY

—This is a low-emission, Class A product. Operating 

this device in a residential area is likely to cause harmful interference that users must correct at their 

own expense. Pursuant to FCC regulations, operation is subject to the following two conditions:
1. This device may not cause harmful interference; and
2. This device must accept any interference received, including interference that may cause 

undesired operation.

Conformity and Standards

This equipment complies with CE directives 73/23 & 93/68 (LV Safety) and 89/336 (EMC), with Aus-

tralia and New Zealand EMC Framework (C-Tick) and with the following product standards for Unin-

terruptible Power System (UPS).

• EN / IEC / AS 62040-1-1-General and safety requirements for use in operator access area
• EN / IEC / AS 62040-2-EMC requirements; Class A compliant
• EN / IEC / AS 62040-3-Performance requirements and test methods

This equipment complies with 

UL 60950-1:2003, First Edition CSA C22.2 No. 60950-1-03 1st Ed.

April 1, 2003.
For details, see 

4.0 - Technical Specifications

.

Continued compliance requires installation in accordance with these instructions and the use of man-

ufacturer approved accessories only.

General

The unit must be grounded in accordance with applicable current local electrical regulations.
As with other types of power equipment, dangerous voltages are present within the RMP enclosure. 

The risk of contact with these voltages is minimized as the live component parts are housed behind a 

hinged, lockable door. No risk exists to any personnel when operating the equipment in the normal 

manner, following the recommended operating procedures. 
All equipment maintenance and servicing procedures involve internal access and should be carried 

out only by trained personnel.

User-Serviceable Parts

There are no user-serviceable parts behind covers requiring a tool for removal. All equipment mainte-

nance and servicing procedures involving internal access requires the use of a tool and should be car-

ried out only by trained personnel.

I

NFORMATION

FOR

THE

 P

ROTECTION

OF

THE

 E

NVIRONMENT

Unit Servicing

This unit makes use of components dangerous for the environment, including electronic cards and 

other electronic components. Any of these components that are removed from the unit must be taken 

to specialized collection and disposal centers.

Unit Dismantling

If this unit must be dismantled, this operation must be carried out only by properly trained and qual-

ified specialized personnel. The unit must be taken to a center that specializes in collection and dis-

posal of dangerous substances.