22
Introduction
UM6C55C (P7000597)
User Manual
Standard 10.00 (March 2008)
Lorain Power System (AP6C55CA/CB)
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
In many applications, a consistent single point ground topology should be
maintained for all associated equipment. The Lorain CIP
Access power
system complies with the requirements for single point grounding.
2.3. Configurations
2.3.1.
Lorain CIP Power Systems
The AP6C55CA/CB Lorain CIP
power systems are available in various
configurations to meet specific customer requirements. Refer to Table 2.1 and
Table 2.2 for the Lorain CIP 4890 and Lorain CIP 48120 power shelf options.
Table 2.1 – Lorain CIP 4890 AP6C55CB power shelf options
Power shelf code
Description
AP5C55CA
Power shelf, 19”, individual AC feeds, rear access, e/w three
IEC320 connectors
AP5C55CB
Power shelf, 19”, individual AC feeds, front access, e/w three
IEC320 connectors
AP5C55CC
Power shelf, 19”, single AC feed, rear access, for one
armored cable or flexible conduit
Table 2.2 – Lorain CIP 48120 AP6C55CA power shelf options
Power shelf code
Description
AP5C55BA
Power shelf, 23”, individual AC feeds, rear access, e/w four
IEC320 connectors
AP5C55BB
Power shelf, 23”, individual AC feeds, front access, e/w four
IEC320 connectors
AP5C55BC
Power shelf, 23”, individual AC feeds, rear access, for four
armored cables or flexible conduits
AP5C55BE
Power shelf, 23”, dual AC feeds, front access, for two
armored cables or flexible conduits
AP5C55BF
Power shelf, 23”, dual connectorized AC feeds, front access
AP5C55BG
Power shelf, 23”, single AC feed, front access, for one
armored cable or flexible conduit
AP5C55BH
Power shelf, 23”, dual AC feeds, rear access, for two
armored cables or flexible conduits
Figure 2.1 illustrates an AP6C55CA Lorain CIP
48120 power system
consisting of an AP5C55BA 23”-mounting shelf with four 1500 W plug-in
rectifiers, a System Manager CIP, and the battery connection and distribution
section. This system can provide up to 90 A (N+1) of discharge load capacity
when operated from a 208/240 V ac source, or up to 45 A (N+1) of discharge
load capacity when operated from a 110/120 V ac source. A system having
the same configuration, but with 750 W rectifiers, would have a capacity of
45 A (N+1) when operated from a 110/120 or 208/240 V ac source.
Summary of Contents for Lorain CIP 48120 AP6C55CA
Page 2: ......
