Specifications
29
User Manual
UM6C55C (P7000597)
Lorain Power System (AP6C55CA/CB)
Standard 10.00 (March 2008)
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
AP5C55BG power
shelf looks similar, but uses only one terminal block in the
front position to terminate the AC wires for the single feed. These options are
not available on the Lorain CIP 4890 shelf (19”-mounting).
Figure 3.5 – AC cabling layout at the front of a Lorain CIP 48120 power system
using an AP5C55BE power
shelf with dual AC feeds
Figure 3.6 illustrates a front view of an empty Lorain CIP
Access power shelf
AP5C55BF (23”-mounting) with four rectifier positions, one controller
position, the distribution section, as well as the connectorized AC interface
box specific to this shelf.
Figure 3.6 – Front view of an empty 23” mounting Lorain CIP Access 48120 power system using
an AP5C55BF power
shelf
The AC supply for the rectifiers is brought into the shelf by means of two AC
cords (15 A and 20 A cords available) connected to the Mate-N-Lock
TM
connectors (AMP) on top of the AC interface box. Feed A is for rectifiers 1
and 2, while feed B is for rectifiers 3 and 4. See Figure 3.7.
Summary of Contents for Lorain CIP 48120 AP6C55CA
Page 2: ......
