70
Configuring and operating the system
UM6C55C (P7000597)
User Manual
Standard 10.00 (March 2008)
Lorain Power System (AP6C55CA/CB)
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Screen 1
This screen displays the main menu of the GUI, on the left side, whether there
are any active alarms, in the top line, and the
System
submenu for the
STATUS
main heading, which contains the following items:
•
the name of the system (usually the location),
•
the float voltage, in real time,
•
the load current, in real time,
•
the battery current, in real time,
•
the percentage of the total rectifier capacity being used,
•
whether the temperature compensation function is active or not,
•
whether there is an ongoing battery test, voltage boost or battery
current limitation,
•
whether there are any special operations enabled (System Manager CIP
only) and
•
the
IP
address of the System Manager CIP.
Note:
Each screen in the GUI displays the main menu of the GUI, on the
left side, as well as whether there are any active alarms in the top line.
However, to avoid repeating this information unnecessarily, this
information will not be shown in the other screens in this Chapter.
5.6.2.
Menu structure of the GUI
To view the complete menu structure in the GUI, after you have logged onto
the System Manager CIP, click on
Web Site Map
at the bottom of the main
menu, on the left side of the screen. The complete menu, as listed in the
following table, will be displayed.
Summary of Contents for Lorain CIP 48120 AP6C55CA
Page 2: ......
