58
Configuring and operating the system
UM6C55C (P7000597)
User Manual
Standard 10.00 (March 2008)
Lorain Power System (AP6C55CA/CB)
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Figure 5.5 – Default screen on System Manager CIP graphical display
- 54.5V 36A 40%
MJ: 0 MN: 0 O1: 0
ALARM STAT SET MAINT
Four main menus called ALARM, STATUS, SETTINGS and
MAINTENANCE are then accessible by clicking on the associated push-
button below the LCD screen.
Note:
The number of active alarms is indicated besides each alarm severity
indication.
5.5.2. Inactivity
timer
While navigating through the various menus, if no button is pushed for 3
minutes, the backlight of the LCD display extinguishes. If no button is
pushed for 5 minutes, the System Manager CIP returns to the default screen
illustrated in Figure 5.5. If no button is pushed for the time period
programmed in the “SETTINGS/DIP AUTOOFF” screen in the Settings
menu (see Figure 5.8), the LCD display extinguishes.
5.5.3.
Navigating through the menus
Use the four push buttons to scroll through the various screens of the four
submenus illustrated in Figure 5.6 to Figure 5.9. The
button is
always used to go back to the previous menu or submenu screen.
5.5.4. Modifying
values
Some values can be modified locally, while some others can only be modified
while remotely accessing the GUI of the System Manager CIP through the
web interface. In both cases, it is necessary to enter the appropriate password
to be allowed to modify values. Note that the local password required to
modify values locally can only be enabled while accessing the controller
remotely through the web server GUI.
5.5.5. Alarm
menu
The alarm menu is used to view detailed information about ongoing (ACTIV)
alarms and passed alarms (HIST). It is also possible through this menu to
inhibit (INHIB) the output alarm relays and to erase the alarm log.
Summary of Contents for Lorain CIP 48120 AP6C55CA
Page 2: ......
